Browsing Mechanical Engineering by Title
Now showing items 136-155 of 465
-
The effect of pH on particle agglomeration and optical properties of nanoparticle suspensions
(Elsevier, 2018-11)Nanoparticle suspensions (NPSs) are used extensively to improve the thermal efficiency of different engineering systems because of their unique thermo-optical properties. NPSs have also been uses in coatings as they improve ... -
Effect of phase change materials on the optical path of LEDs for opto-thermal enhancement
(IEEE, 2023-05)A novel concept based on the encapsulation of transparent phase change materials (PCMs) into the optical packaging structure of light-emitting diodes (LEDs) is presented in this article. The concept was initiated by ... -
Effect of polymer coating on vapor condensation heat transfer
(ASME, 2020-04-01)Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ... -
Effect of processing parameters on the phase transformation of a high temperature copper-based shape memory alloy
(Springer, 2023-11)In the present study, the influence of the processing parameters on the transformation temperatures and microstructural evolution in a copper-based shape memory alloy was investigated. Five times remelting in identical ... -
Effect of processing parameters on the strength of keyhole free friction stir spot aluminum welds
(American Institute of Physics Inc., 2019)Intermediate layer friction stir spot welding (IL-FSSW) is a new solid-state welding method appropriate for making spot joints, particularly in light-weight materials, especially notable on account of the weight saving ... -
Effect of purity levels on the high-temperature deformation characteristics of severely deformed titanium
(Springer International Publishing, 2017)In the present investigation, high-temperature compression tests were conducted at strain rates of 0.001 to 0.1 s−1 and at temperatures of 873 K to 1173 K (600 °C to 900 °C) in order to study the hot deformation characteristics ... -
Effect of severe plastic deformation on the damping behavior of titanium
(Elsevier, 2019-06-01)In this work, influence of severe plastic deformation on the damping properties of commercial purity titanium is explored. Deformation induced grain refinement improved the strength at room temperature while this effect ... -
Effect of slurry aging on stability and performance of chemical mechanical planarization process
(Elsevier, 2011-03)Chemical mechanical planarization (CMP) is known to be one of the most challenging processes in microelectronics manufacturing due to the number of variables involved in the design of the process. In particular, the slurries ... -
The effect of spotwelds and structural adhesives on static and dynamic characteristics of vehicle body design
(Sage, 2021-10)Spotwelding and structural adhesive applications are two important processes in the automotive industry as they are closely associated with the functional requirements, weight, and cost of the vehicle. Even though there ... -
Effect of stress aging induced precipitates on corrosion behavior of NiTi shape memory alloys
(Springer, 2021-10)In this study, the influences of the stress aging process on the electrochemical behaviors toward evaluating corrosion resistance of NiTi shape memory alloys in the in-vitro condition have been investigated. For this ... -
Effect of structural adhesives in noise, vibration and harshness (NVH) characteristics of vehicle body design
(International Institute of Acoustics and Vibration, IIAV, 2018)Application of structural adhesives has received an increased interest in automotive industry due to their attractive characteristics as an alternative to other lightweight strategies. There are various modeling methods ... -
Effect of the motion pattern on the turbulence generated by an active grid
(Springer, 2021)In the field of turbulence research, many experiments are performed using turbulence generated under reproducible conditions. In the past mostly static grids having a fixed blockage were adopted, but in order to generate ... -
Effect of the probe location on the absorption by an array of gold nano-particles on a dielectric surface
(Elsevier, 2017)Effect of silicon atomic force microscope probe position and particle spacing on the local absorption of an array of gold nanoparticles placed over a dielectric borosilicate glass surface are evaluated. An improved, ... -
Effects of aging on the microstructure and phase transformation behavior of cu-al-mn shape memory alloy
(Trans Tech Publications Ltd, 2021)In the present study, the effects of artificial aging heat treatment on the transformation temperatures and hardness of Cu-Al-Mn shape memory alloy have been investigated. The aging processes have been performed on the ... -
Effects of interlayer on the friction stir spot welding of stainless steel
(Elsevier, 2022-01)Comparison of Interlayer Friction Stir Spot Welding (IL-FSSW) and conventional Friction Stir Spot Welding (FSSW) of 304 stainless steel is presented in this study. IL-FSSW is introduced as a novel spot-welding technique ... -
Effects of turbulence intensity and length scale on the flame location of premixed turbulent combustion in a diffuser combustor
(J-STAGE, 2017)This study focused on the dependency of the flame location of a premixed propane-air flame on turbulence intensity and length scale. The flame location was investigated using a diffuser-type combustor to show the response ... -
An efficient design methodology for graded surface-based lattice structures using free-size optimization and enhanced mapping method
(Elsevier, 2021-11-15)In this paper, a novel Free-size Optimization based Graded Lattice Generation (FOGLG) method, that generates the functionally graded lattice (FGL) structures using free-size optimization, is proposed. In addition, the ... -
The eighth international symposium on radiative transfer
(Elsevier, 2017-08)This Special Issue of The Journal of Quantitative Spectroscopy and Radiative Transfer is based on the papers selected from RAD-16, the Eighth International Symposium on Radiative Transfer, which was held June 2016, in ... -
Elevated temperature mechanical behavior of severely deformed titanium
(Springer Nature, 2014-05)In this investigation, compression tests were performed at a strain rate of 0.001-0.1 s(-1) in the range of 600-900 degrees C to study the high temperature deformation behavior and flow stress model of commercial purity ... -
Elevated temperature mechanical characteristics and fracture behavior of a novel beta titanium alloy
(MDPI, 2023-02-03)In the present work, the elevated-temperature deformation characteristics and microstructural evolution of a Ti-5V-5Mo-5Cr-4Al alloy in solution-treatment conditions were studied under a tensile load at temperatures in the ...
Share this page
