Browsing Faculty of Engineering by Title
Now showing items 1809-1828 of 3117
-
Numerical analysis of the radiant heating effectiveness of a continuous glass annealing furnace
(Elsevier, 2022-03-05)Radiative heat transfer is the dominant mode of heat transfer in glass annealing furnaces. Especially in electrically heated furnaces due to the nonparticipating nature of the furnace atmosphere the radiative heat transfer ... -
Numerical and experimental analysis of a heat-pipe-embedded printed circuit board for solid state lighting applications
(Taylor & Francis, 2019-01-02)Thermal management is one of the main issues for electronics cooling especially for tightly packaged PCBs that experience local heat generation. Thus, theoretical and experimental investigations have been conducted to ... -
Numerical and experimental analysis of impinging synthetic jets for cooling a point-like heat source
(ASME, 2018-05-01)High power light emitting diodes (LEDs) being used for low and high beam in automotive lighting need active cooling of their heat sinks by radial or axial fans. But the moving elements of the fan cause abrasion, noise, and ... -
Numerical and experimental analysis of the flow and transition of free synthetic jets
(IOP Publishing, 2019-04)In this paper, flow characteristics and the transition of synthetic jets are investigated numerically and experimentally. The investigated synthetic jets have a dimensionsless stroke length L-0/d of 146 and 167, an U-0 of ... -
Numerical assessment of the factors controlling the acoustic response of wind turbine blades
(Canadian Acoustical Association, 2019)The blades of wind turbine are the most critical parts of the wind turbine system, which contribute to noise generated by wind turbine due to excitation from air streams across them. In this numerical study, the effect of ... -
Numerical computation of solitary wave solutions of the Rosenau equation
(Elsevier, 2020-11)We construct numerically solitary wave solutions of the Rosenau equation using the Petviashvili iteration method. We first summarize the theoretical results available in the literature for the existence of solitary wave ... -
A numerical investigation into frost formation under impinging flow conditions
(IEEE, 2021)Frost formation is an undesired phenomenon for a wide range of practical applications as it diminishes amount of heat dissipation from heat transfer regions. In this paper, frost growth process on a vertically suspended ... -
Numerical investigation of multiphase flow inside a pressure swirl atomizer at the initial stage of injection
(Begell House Inc., 2018)Pulse-mode operating atomizers are widely used in industry. This paper presents the fluid flow details and characteristics inside a pulse-mode operating pressure swirl atomizer (PSA). Transient flow simulations are performed ... -
Numerical investigation of the flame location of turbulent premixed combustion in a diffuser burner exposed to various turbulence intensities and turbulence length scales
(Turkish Society of Thermal Science and Technology (TIBTD), 2018)This study aims to investigate the response of the flame location of a turbulent premixed flame that has been exposed to various turbulence intensities and turbulence length scales. A diffuser-type burner is used to reveal ... -
Numerical modeling of the offshore wind turbine monopile foundation under environmental loading
(CRC Press, 2019)Prediction of dynamic performance of an offshore wind turbine requires consideration of many different design parameters. Beside the superstructure, foundation also plays an important role both functionally and financially ... -
A numerical study of a single unsteady laminar slot jet in a confined structure
(ASME, 2013)With the inherit advantages of air cooling, jet impingement can produce a factor of two or higher heat transfer than conventional fan flow over bodies. Therefore, impinging jets can solve a number of electronics thermal ... -
Numerical study of the intensification of single-phase heat transfer in a sandwich-like channel using staggered miniature-pin fins
(Taylor & Francis, 2023-04)This study presents the numerical analysis of single-phase forced convection heat transfer and pressure drop during internal flow in a shallow, rectangular sandwich-like copper channel heated from both the top and the ... -
Object ranging and sensing by temporal cross-correlation measurement
(SPIE, 2020)We present a novel method to measure the range of an object in a lab setting. This is realised by utilizing the phase insensitive cross-correlation analysis of the probe and reference photons generated in a spontaneous ... -
Object tracking and identification by quantum radar
(SPIE, 2019)Quantum Radar is a promising technology that could have a strong impact on the civilian and military realms. In this study we introduce a new concept design for implementing a Quantum Radar, based on the time and polarization ... -
Object tracking in the presence of occlusions using multiple cameras: a sensor network approach
( Association for Computing Machinery, 2013)This article describes a sensor network approach to tracking a single object in the presence of static and moving occluders using a network of cameras. To conserve communication bandwidth and energy, we combine a task-driven ... -
Objective and subjective QoE evaluation for adaptive point cloud streaming
(IEEE, 2020-05)Volumetric media has the potential to provide the six degrees of freedom (6DoF) required by truly immersive media. However, achieving 6DoF requires ultra-high bandwidth transmissions, which real-world wide area networks ... -
Observation of t ¯ t H production
(American Physical Society, 2018-06-04)The observation of Higgs boson production in association with a top quark-antiquark pair is reported, based on a combined analysis of proton-proton collision data at center-of-mass energies of root s = 7, 8, and 13 TeV, ... -
Observation of a diffractive contribution to dijet production in proton-proton collisions at root s = 7 TeV
(American Physical Society, 2013-01-08)The cross section for dijet production in proton-proton collisions at root s = 7 TeV is presented as a function of (xi) over tilde, a variable that approximates the fractional momentum loss of the scattered proton in ... -
Observation of a new boson at a mass of 125 GeV with the CMS experiment at the LHC
(Elsevier, 2012-09-17)Results are presented from searches for the standard model Higgs boson in proton-proton collisions at root s = 7 and 8 TeV in the Compact Muon Solenoid experiment at the LHC, using data samples corresponding to integrated ... -
Observation of a new boson with mass near 125 GeV in pp collisions at root s=7 and 8 TeV
(Springer Science+Business Media, 2013-06)A detailed description is reported of the analysis used by the CMS Collaboration in the search for the standard model Higgs boson in pp collisions at the LHC, which led to the observation of a new boson. The data sample ...
Share this page
