Search
Now showing items 21-30 of 128
A numerical investigation into frost formation under impinging flow conditions
(IEEE, 2021)
Frost formation is an undesired phenomenon for a wide range of practical applications as it diminishes amount of heat dissipation from heat transfer regions. In this paper, frost growth process on a vertically suspended ...
Particle based investigation of self-heating effect of phosphor particles in phosphor converted light emitting diodes
(Elsevier, 2021-03)
Since 2003, self-heating effect of phosphor which reduces the efficacy and reliability of phosphor conversion (Pc) light emitting diodes (LEDs), has been a growing research area of opto-thermal Pc-LED modeling. However, ...
Identification and evaluation of cracks in electrostatically actuated resonant gas sensors using Harris Hawk / Nelder Mead and perturbation methods
(Techno-Press, 2021-01)
In this paper we study the static deflection, natural frequency, primary resonance of an electrostatically actuated cracked gas sensor. Besides, a novel hybrid metaheuristic algorithm is proposed to detect the location and ...
On the high-temperature flow response of friction stir processed magnesium metal matrix composites
(ASME, 2021-01-01)
In the current work, multi-pass friction stir processing (FSP) was utilized to fabricate samples of fine-grained aluminum-zinc (AZ) magnesium alloy and its metal matrix composite (MMC). The microstructure and high-temperature ...
Improvement of the computational efficiency of metaheuristic algorithms for the crack detection of cantilever beams using hybrid methods
(Taylor & Francis, 2022-07-03)
This study examines the capability of various optimization algorithms and proposes novel hybrid algorithms for more precise prediction of open-edge cracks in cantilever beams. The natural frequencies of the beam with a ...
On the individual droplet growth modeling and heat transfer analysis in dropwise condensation
(IEEE, 2021-10)
The low convective coefficient at condenser part of spreaders and vapor chambers due to film blanket blocking encourages utilizing dropwise condensation (DWC). Challenges exist in the experimental characterization of DWC, ...
A coupled material removal model for chemical mechanical polishing processes
(IOP Publishing, 2021-10-01)
Chemical mechanical polishing (CMP) is a process used to obtain planarized surfaces in microelectronic device manufacturing. The planarization is achieved by material removal from the wafer surface by synergistic effect ...
Effect of aging on the mechanical behavior of aluminum-steel composites processed by accumulative roll bonding
(Elsevier, 2021)
Severe plastic deformation (SPD) processes have been widely used to provide ultrafine-grained (UFG) structures along with enriched strength in various metals. This study focuses on accumulative roll bonding (ARB), an SPD ...
The effect of spotwelds and structural adhesives on static and dynamic characteristics of vehicle body design
(Sage, 2021-10)
Spotwelding and structural adhesive applications are two important processes in the automotive industry as they are closely associated with the functional requirements, weight, and cost of the vehicle. Even though there ...
Application of novel constrained groove pressing routes on austenitic stainless steel
(Springer, 2021-11)
In this study, a novel set of constrained groove processing routes was put forward especially to underline the variation of strain paths. Namely, 304 stainless steel sheets were processed by five distinctly specified ...
Share this page