Search
Now showing items 221-230 of 253
Fluid flow characteristics inside convergent, divergent and straight open-end pressure swirl atomizer
(Europe, Institute for Liquid Atomization and Spray Systems, ILASS, 2020)
Effects of geometrical parameters on the performance of small-scale open-end pressure swirl atomizers (PSA) have been studied using computational fluid dynamics. The shape of the swirl chamber is the main geometrical feature ...
The effect of pH on particle agglomeration and optical properties of nanoparticle suspensions
(Elsevier, 2018-11)
Nanoparticle suspensions (NPSs) are used extensively to improve the thermal efficiency of different engineering systems because of their unique thermo-optical properties. NPSs have also been uses in coatings as they improve ...
An experimental investigation into frost accumulation over vertical finned and unfinned surfaces during impinging air flow
(ASME, 2020)
Frost formation on evaporators negatively affects the cooling performance of refrigerators. It increases the thermal resistance between the refrigerant and air leading to a reduction in the system cooling capacity. In this ...
Effect of coating method on the surface characteristics of niti shape memory alloy
(Trans Tech Publications Ltd, 2020)
Metallic materials including stainless steel, cobalt-chromium alloys, titanium and its alloys, and nickel-titanium (NiTi) shape memory alloys have been used in biomedical applications since the 1940s due to their favorable ...
Evaluating the mechanical behavior of ARB processed aluminum composites using shear punch testing
(Trans Tech Publications Ltd, 2020)
Multi-layered metal composites have received considerable attention due to their improved mechanical and physical properties. In this study, Al6061/Al2024 composite was processed by accumulative roll bonding (ARB) as a ...
On the EMG-based torque estimation for humans coupled with a force-controlled elbow exoskeleton
(IEEE, 2015)
Exoskeletons are successful at supporting human motion only when the necessary amount of power is provided at the right time. Exoskeleton control based on EMG signals can be utilized to command the required amount of support ...
On the mechanical behavior of accumulative roll bonded lightweight composite
(IOP Publishing, 2019-09)
Multi-layered composites have received great interest due to their enhanced mechanical and physical properties. In this study, Al6061/Al2024 composites were processed by accumulative roll bonding as a severe plastic ...
High temperature characteristics of Al2024/SiC metal matrix composite fabricated by friction stir processing
(Elsevier, 2018-07-25)
In the present study, friction stir processing (FSP) is used for the synthesis of an aluminum metal matrix composite (MMC) reinforced by SiC particles. MMC specimens with reinforced microstructures exhibited significant ...
Modal characterization of additively manufactured TPMS structures: comparison between different modeling methods
(Springer Nature, 2020-10-14)
The use of lattice structures has received increasing interest in various engineering applications owing to their high strength to weight ratio. Advances in additive manufacturing technologies enabled the manufacturing of ...
Parametric studies on vibration characteristics of triply periodic minimum surface sandwich lattice structures
(Springer Nature, 2020-10-07)
Additive manufacturing has opened new avenues for the manufacturing of structures to achieve challenging engineering tasks. Gyroid, a unique example of such structures, exhibits many attractive properties, such as high ...
Share this page