Search
Now showing items 1-10 of 22
Photocatalytic and antibacterial functionality evaluation of nanoboron coated textiles
(2016-09-01)
Antibacterial properties of boron-containing compounds are well known although studies available on pure boron nanoparticles are relatively limited. In the present study, we examine the feasibility of the application of ...
Derivation of generalized Camassa-Holm equations from Boussinesq-type equations
(Informa Group, 2016)
In this paper we derive generalized forms of the Camassa-Holm (CH) equation from a Boussinesq-type equation using a two-parameter asymptotic expansion based on two small parameters characterizing nonlinear and dispersive ...
Surface characterization driven CMP optimization for gallium nitride
(ECS, 2016)
Gallium nitride is a hard and chemically inert material demoting high material removal rates in the chemical mechanical planarization (CMP) applications. This paper focuses on the optimization of the process conditions to ...
Analysis of perlite and pumice based building insulation materials
(Elsevier, 2016-06)
Insulation panels composed of perlite, pumice, and cement were fabricated. Perlite and pumice were used to achieve high thermal resistance, and low density. Experimentation was conducted for determining
R-values of ...
The penetration of acoustic cavitation bubbles into micrometer-scale cavities
(Elsevier, 2016)
The penetration of acoustically induced cavitation bubbles in micrometer-scale cavities is investigated experimentally by means of high-speed photography and acoustic measurements. Micrometer-scale cavities of different ...
Experimental study on heat transfer of multi-walled carbon nanotubes/water nanofluids in horizontal microtubes
(ASME, 2016)
In this study, heat transfer characteristics of multi-walled carbon nanotube based nanofluids were investigated in horizontal microtubes with outer and inner diameters of ∼1067 and ∼889 μm, respectively. Carbon nanotubes ...
Investigation of power distribution on an axial fan
(IEEE, 2016)
Forced convection cooling systems utilize fans which can be axial or radial, small or large in many different configurations. Efficiency of a fan depends on its electrical and mechanical designs as well as the environmental ...
Flow and heat transfer study of an impinging piezoelectric fan over a vertical surface
(ASME, 2016)
Piezoelectric fans are low-form-factor cooling devices, which have gained recent attention for electronics cooling. These devices feature a vibrating blade, which sheds vortices from its tip during its motion. The performance ...
An investigation into flow and heat transfer for a slot impinging synthetic jet
(Elsevier, 2016-09)
According to the latest trends in miniature consumer and military electronics, there is a need for compact cooling solutions to meet performance requirements at compact volumes. Successful technology must feature a thin ...
Application of chemical mechanical polishing process on titanium based implants
(Elsevier, 2016-11-01)
Modification of the implantable biomaterial surfaces is known to improve the biocompatibility of metallic implants. Particularly, treatments such as etching, sand-blasting or laser treatment are commonly studied to understand ...
Share this page