Search
Now showing items 11-20 of 22
On the mechanical behavior of cold deformed aluminum 7075 alloy at elevated temperatures
(Elsevier, 2016-07-18)
In the present study, elevated temperature deformation behavior and microstructural evolution of 7075 aluminum alloy at annealed and cold rolled conditions were examined. Isothermal uniaxial tensile tests at a temperature ...
Predicting heat transfer for low- and high-frequency central-orifice synthetic jets
(IEEE, 2016-04)
As electronic devices are becoming more compact each day, the more effective and efficient active cooling technologies are needed. Microfluidic devices, such as synthetic jets, serve as a potential candidate to fulfill the ...
Enhancing local absorption within a gold nano-sphere on a dielectric surface under an AFM probe
(Elsevier, 2016-07)
This study considers enhancing localized absorption by a gold nanoparticle (NP) placed over a substrate where an atomic force microscope (AFM) tip is in close proximity of the particle. The gold NP and AFM tip are interacting ...
Metal oxide thin film characterization for new generation chemical mechanical planarization development
(The Electrochemical Society, 2016)
This study targets to create a basis for the process development in the new generation semiconductor industry dealing with atomic scale devices. We focus on the CMP process development as it is used for the current and ...
Thermal enhancement of an LED light engine for automotive exterior lighting with advanced heat spreader technology
(ASME, 2016)
In recent years, light emitting diodes (LEDs) have become an attractive technology for general and automotive illumination systems. LEDs have been preferable for automobile lighting due to its numerous advantages such as ...
Turbulence impact on wind turbines: experimental investigations on a wind turbine model
(IOP Publishing, 2016)
Experimental investigations have been conducted by exposing an efficient wind turbine model to different turbulence levels in a wind tunnel. Nearly isotropic turbulence is generated by using two static squared grids: fine ...
Eurotherm conference no. 105: computational thermal radiation in participating media V
(Elsevier, 2016-03)
The Eurotherm Seminar No.: 105 on Computational Thermal Radiation in Participating Media was held in Albi, France on 1–3 April 2015. It was the fifth in a series after Mons, Belgium (Eurotherm Seminar No.: 73, April 2003), ...
Performance of two real-life California bridges under regional natural hazards
(2016-03)
The performance of two real-life California bridges is assessed under a possible regional multihazard condition involving floods and earthquakes. For flood events with varied frequency, expected scour depths at bridge piers ...
3-D extension of chemical mechanical polishing for nano-structuring applications on alternative technologies
(The Electrochemical Society, 2016)
In this study we tune the chemical mechanical polishing process to a 3-D level to generate controlled nanostructures on functional metallic surfaces such as titanium implants and steel based heating elements. The chemical ...
An investigation into flow and heat transfer of an ultrasonic micro-blower device for electronics cooling applications
(Elsevier, 2016-05-08)
As compact electronics increase in functionality, new electronics cooling approaches must be more effective, and they must be lower in form factor. In this paper, we investigated the cooling performance of a miniature ...
Share this page