Browsing Mechanical Engineering by Title
Now showing items 340-359 of 465
-
On ‘‘Radiative transfer in three-dimensional rectangular enclosures containing inhomogeneous,anisotropically scattering media’’
(Elsevier, 2010-07)Our 1985 paper (JQSRT 1985; 33: 533–549) reported the result of the research we conducted back then to better understand heat transfer processes in large-scale combustion chambers, especially in pulverized coal-fired ... -
Optical and radiative properties of individual and hybrid nanosuspensions: The effects of similar and dissimilar particle agglomerates on thermal radiation
(Yildiz Technical University, 2021-02)Nanosuspensions are proposed for use in improving the thermal efficiency of different thermal systems; including solar thermal power plants. Because of their excellent and unique thermo-optical properties, which are the ... -
Optical and thermal analysis of secondary optics in light emitting diodes' packaging: Analysis of MR16 lamp
(IOP Publishing, 2021-12-08)Optical and thermal control are two main factors in package design process of lighting products, specifically light emitting diodes (LEDs). This research is aimed to study the role of secondary optics in opto-thermal ... -
Optical subwavelength-scale displacement sensing with dynamically controllable characteristics
(The Optical Society, 2010)Silicon photonic devices with embedded MEMS have significantly been studied. Characterization and operation of such devices in the nanometer-level is critical. A novel optical technique for subwavelength displacement ... -
Optimal solution of the discrete cost multicommodity network design problem
(Elsevier, 2008-10-15)We investigate a multicommodity network design problem where a discrete set of Technologies with step-increasing cost and capacity functions should be installed on the edges. This problem is a fundamental network design ... -
Optimal stiffness tuning for a lower body exoskeleton with spring-supported passive joints
(IEEE, 2018-10-09)This paper presents a framework to optimally tune the stiffness values of spring-supported passive joints that are included in lower body exoskeletons. First, a dynamic model of a combined human-exoskeleton system was ... -
Optimization of the intermediate layer friction stir spot welding process
(Springer Nature, 2019-09)Friction stir spot welding was performed for joining sheets of 2024 and 6061 aluminum alloys, which is otherwise difficult using conventional welding techniques. The presented approach utilizes an intermediate layer to ... -
Optimized process and tool design for gan chemical mechanical planarization
(The Electrochemical Society, 2017-10-04)In this paper, we present a systematic approach to the gallium nitride (GaN) chemical mechanical planarization (CMP) process through evaluating the effect of crystallographic orientation, slurry chemistry and process ... -
Özyeğin biopsy robot: system integration architecture and motion compensation of a moving target
(TÜBİTAK, 2018-05-30)This paper presents the complete system architecture of a robotic biopsy system for real-time operations. The system has individual functional blocks working simultaneously including a 5 DoF parallel robot, ultrasound (US) ... -
Parametric effects on pool boiling heat transfer and critical heat flux: A critical review
(ASME, 2022-12)Pool boiling heat transfer offers high-performance cooling opportunities for thermal problems of electronics limited with high heat fluxes. Therefore, many researchers have been extensively studying over the last six ... -
Parametric studies on vibration characteristics of triply periodic minimum surface sandwich lattice structures
(Springer Nature, 2020-10-07)Additive manufacturing has opened new avenues for the manufacturing of structures to achieve challenging engineering tasks. Gyroid, a unique example of such structures, exhibits many attractive properties, such as high ... -
Participating media for volumetric heat generation
(Yıldız Teknik Üniversitesi, 2019-01)When an electromagnetic wave interacts with participating media (e.g. particulate media); the intensity of the radiation may be changed by the absorption, emission and scattering phenomena. Subsequently, the incident ... -
Particle based investigation of self-heating effect of phosphor particles in phosphor converted light emitting diodes
(Elsevier, 2021-03)Since 2003, self-heating effect of phosphor which reduces the efficacy and reliability of phosphor conversion (Pc) light emitting diodes (LEDs), has been a growing research area of opto-thermal Pc-LED modeling. However, ... -
Particle size analysis on wide size distribution powders; effect of sampling and characterization technique
(Elsevier, 2015-01)Particle size distribution of powders plays a very important role in determining the critical chemical and physical properties of the particulate systems. Precise determination of particle size distribution depends on ... -
Pattern generation and compliant feedback control for quadrupedal dynamic trot-walking locomotion: experiments on roboCat-1 and hyQ
(Springer Science+Business Media, 2015-04)In this paper, we introduce a method that synergistically combines an analytical pattern generator and a feedback controller frame, which are developed for the purpose of synthesizing dynamic quadrupedal trot-walking ... -
The penetration of acoustic cavitation bubbles into micrometer-scale cavities
(Elsevier, 2016)The penetration of acoustically induced cavitation bubbles in micrometer-scale cavities is investigated experimentally by means of high-speed photography and acoustic measurements. Micrometer-scale cavities of different ... -
Performance of two real-life California bridges under regional natural hazards
(2016-03)The performance of two real-life California bridges is assessed under a possible regional multihazard condition involving floods and earthquakes. For flood events with varied frequency, expected scour depths at bridge piers ... -
Personal inertial navigation system assisted by mems ground reaction sensor array and interface ASIC for GPS-denied environment
(IEEE, 2018-11)A personal inertial navigation system (PINS) assisted by a microelectromechanical systems (MEMS)-based 13 × 26 ground reaction sensor array (GRSA) and a low-power interface application-specified integrated circuit (ASIC) ... -
Personal inertial navigation system employing MEMS wearable ground reaction sensor array and interface ASIC achieving a position accuracy of 5.5m over 3km walking distance without GPS
(IEEE, 2018)An accurate personal inertial navigation system under GPS-denied environment is highly critical for demanding applications such as firefighting, rescue missions, and military operations. Location-aware computation for ... -
A personal navigation system using mems-based high-density ground reaction sensor array and inertial measurement unit
(IEEE, 2015)This paper describes a prototype personal navigation system developed for position tracking under GPS denied environments by employing a commercial inertial measurement unit (IMU) and a MEMS-based ground reaction sensor ...
Share this page
