Browsing by Author "Sendur, K."

Now showing 1 - 8 of 8

Metadata only
Colorization of passive radiative cooling coatings using plasmonic effects
(Elsevier, 2023-05) Pirouzfam, N.; Mengüç, Mustafa Pınar; Sendur, K.; Mechanical Engineering; MENGÜÇ, Mustafa Pınar
Passive radiative cooling is a novel concept and is likely to be important for building and industrial energy ef-ficiency efforts, as it will significantly contribute to the reduction of thermal management costs for electronic equipment. In most studies, radiative cooling devices are not considered for their colors; although to find a large number of users, it must be attractive to designers or architects, who usually pay significant attention to aesthetic and decorative aspects of paints. Since the majority of the coatings reported in the literature are white, there is also a need to develop color-coordinated paints and coatings. Here, we propose an approach for designing a simple structure of colored radiative cooling devices assisted by a plasmonic structures. We show that they can be tuned as desired to produce different hues of colored coatings, while maintaining adequate radiative cooling power. To demonstrate the conflicting functions of color display and radiative cooling performance, we use a bowtie nanoantenna as a color-displaying structure to investigate how the structural factors affect the cooling performance and color display accordingly. We show that periodic high index-low index alternating layers (SiO2-TiO2) on top of a thin silver layer cause broadband reflection in visible and near-infrared spectrums, while to achieve narrowband absorption in the visible region, which leads to the desired colorization, the bowtie nanoantenna is utilized. We report that by changing the structural parameters of a nanoantenna, the resonance peaks are controlled to yield a narrowband absorption in the visible spectrum to create different colors. More-over, our results indicate that although adding coloration structure to a conventional radiative cooling system reduces the cooling power by around 30%, it is still reasonable high, around 60 W/m2, and is still suitable to be used for daytime radiative cooling where control over the color is needed. Acceptable cooling power while ability to control the coloration make the proposed colored radiative cooling a potential candidate to be used in various applications, both in high end buildings or for thermal management of electronic equipment.
Metadata only
Deagglomeration of nanoparticle clusters in a “cavitation on chip” device
(American Institute of Physics Inc., 2020-11-01) Gevari, M. T.; Niazi, S.; Karimzadehkhouei, M.; Sendur, K.; Mengüç, Mustafa Pınar; Ghorbani, M.; Kosar, A.; Mechanical Engineering; MENGÜÇ, Mustafa Pınar
Due to the potential of significant energy release in cavitating flows, early cavitation inception and intensification of cavitating flows are of great importance. To use this potential, we investigated the deagglomeration of nanoparticle clusters with the implementation of hydrodynamic cavitation in a microfluidic device. For this purpose, a microfluidic device with a micro-orifice geometry was designed and fabricated using standard microfabrication processes. The system was tested with distilled water in the assembled experimental setup. The flow patterns were characterized using the cavitation number and inlet pressure. Titania nanoparticles were utilized to prepare nanoparticle suspensions. The suspensions were heated to allow agglomeration of nanoparticles. The system was operated with the new working fluid (nanoparticle clusters) at different inlet pressures. After characterizing flow patterns, the flow patterns were compared with those of pure water. The deagglomeration effects of hydrodynamic cavitation on nanoparticle clusters showed the possibility to apply this method for the stabilization of nanoparticles, which paves way to the implementation of nanoparticle suspensions to thermal fluid systems for increased energy efficiency as well as to drug delivery. Our results also indicate that the presence of nanoparticles in the working fluid enhanced cavitation intensity due to the increase in the number of heterogeneous nucleation sites.
Metadata only
Increasing the stability of nanofluids with cavitating flows in micro orifices
(AIP, 2016) Karimzadehkhouei, M.; Ghorbani, M.; Sezen, M.; Sendur, K.; Mengüç, Mustafa Pınar; Leblebici, Y.; Kosar, A.; Mechanical Engineering; MENGÜÇ, Mustafa Pınar
One of the most critical challenges for nanofluids in practical applications is related to their stability and reusability since a gradual agglomeration of nanoparticles in nanofluids occurs with time and is accelerated by heating. In this study, we propose a technique to maintain the performance and stability of nanofluids with the use of cavitating flows through micro orifices to prevent agglomeration and sedimentation of nanoparticles, which will increase the durability of the nanofluids. γ-Al2O3 (gamma-alumina) nanoparticles with a mean diameter of 20 nm suspended in water were utilized. In the current approach, a flow restrictive element induces sudden pressure, which leads to cavitation bubbles downstream from the orifice. The emerging bubbles interact with the agglomerated structure of nanoparticles and decrease its size through hitting or shock waves generated by their collapse, thereby increasing the stability and reusability of nanofluids. The method does not involve any use of expensive surfactants or surface modifiers, which might alter the thermophysical properties of nanofluids, may adversely influence their performance and biocompatibility, and may limit their effectiveness.
Metadata only
Integrating magnetic heads with plasmonic nanostructures in multilayer configurations
(IEEE, 2013-07) Ogut, E.; Mengüç, Mustafa Pınar; Sendur, K.; Mechanical Engineering; MENGÜÇ, Mustafa Pınar
Heat-assisted magnetic recording (HAMR) is an emerging technology that has increased the areal density of conventional recording techniques for hard disc drives. Integrated heads have enabled this increase through localized heating of the recording media during the recording process. One of the problems in integrating magnetic heads with plasmonic nanotransducers is the resulting losses. In this study, multilayer conﬁgurations with gold thin-ﬁlms near magnetic thin-ﬁlms are investigated to minimize radiative and load-induced losses. The effect of load-induced damping of the magnetic ﬁlm and evanescent coupling is identiﬁed with the intensity enhancement near the magnetic ﬁlms. It is shown that a higher intensity enhancement can be obtained by minimizing radiative and load-induced losses through adjusting layer thicknesses in multilayer conﬁgurations.
Open Access
Localized radiative energy transfer from a plasmonic bow-tie nano-antenna to a magnetic thin film stack
(Springer Business+Media, 2011-06) Sendur, K.; Kosar, A.; Mengüç, Mustafa Pınar; Mechanical Engineering; MENGÜÇ, Mustafa Pınar
Localized radiative energy transfer from a near-field emitter to a magnetic thin film structure is investigated. A magnetic thin film stack is placed in the near-field of the plasmonic nano-antenna to utilize the evanescent mode coupling between the nano-antenna and magnetic thin film stack. A bow-tie nano-optical antenna is excited with a tightly focused beam of light to improve near-field radiative energy transfer from the antenna to the magnetic thin film structure. A tightly focused incident optical beam with a wide angular spectrum is formulated using Richards–Wolf vector field equations. Radiative energy transfer is investigated using a frequency domain 3D finite element method solution of Maxwell’s equations. Localized radiative energy transfer between the near-field emitter and the magnetic thin film structure is quantified for a given optical laser power at various distances between the near-field emitter and magnetic thin film.
Metadata only
Passive radiative cooling design with broadband optical thin-film filters
(Elsevier, 2017-09) Kecebas, M. A.; Mengüç, Mustafa Pınar; Kosar, A.; Sendur, K.; Mechanical Engineering; MENGÜÇ, Mustafa Pınar
The operation of most electronic semiconductor devices suffers from the self-generated heat. In the case of photovoltaic or thermos-photovoltaic cells, their exposure to sun or high temperature sources make them get warm beyond the desired operating conditions. In both incidences, the solution strategy requires effective radiative cooling process, i.e., by selective absorption and emission in predetermined spectral windows. In this study, we outline two approaches for alternative 2D thin film coatings, which can enhance the passive thermal management for application to electronic equipment. Most traditional techniques use a metallic (silver) layer because of their high reflectivity, although they display strong absorption in the visible and near-infrared spectrums. We show that strong absorption in the visible and near-infrared spectrums due to a metallic layer can be avoided by repetitive high index-low index periodic layers and broadband reflection in visible and near-infrared spectrums can still be achieved. These modifications increase the average reflectance in the visible and near-infrared spectrums by 3–4%, which increases the cooling power by at least 35 W/m2. We also show that the performance of radiative cooling can be enhanced by inserting an Al2O3 film (which has strong absorption in the 8–13 µm spectrum, and does not absorb in the visible and near-infrared) within conventional coating structures. These two approaches enhance the cooling power of passive radiative cooling systems from the typical reported values of 40 W/m2–100 W/m2 and 65 W/m2 levels respectively.
Metadata only
Spectrally selective filter design for passive radiative cooling
(The Optical Society, 2020-04-01) Kecebas, M. A.; Mengüç, Mustafa Pınar; Kosar, A.; Sendur, K.; Mechanical Engineering; MENGÜÇ, Mustafa Pınar
Radiative cooling is potentially one of the most innovative approaches to reducing energy density in buildings and industry, as well as achieving higher levels of energy efficiency. Several studies have reported the design of spectrally selective layered structures for daytime passive radiative cooling. However, a comprehensive design of such systems requires the spectral behavior of different materials and radiative heat transfer mechanisms to be addressed together. Here, we introduce a design methodology for daytime passive radiative cooling with thin film filters which accounts for the spectral tailoring at the visible and infrared spectrum. The major difference of this method is that it does not require a predefined target ideal emittance. The results show that higher cooling powers are possible compared to the previously reported thin-film structures, which were designed from a purely spectral perspective. The underlying mechanisms of the resulting spectral profiles, which give rise to improved performance, are investigated by wave impedance analysis. Cooling powers up to 100 W/m(2) are obtained with seven layers on Ag. The findings of this study indicate that structures with better performance in terms of cooling powers and temperature reduction rates can be obtained following the procedure discussed.
Metadata only
Spectrally selective filter design for passive radiative cooling
(The Optical Society, 2020-04-01) Kecebas, M. A.; Mengüç, Mustafa Pınar; Kosar, A.; Sendur, K.; Mechanical Engineering; MENGÜÇ, Mustafa Pınar
Radiative cooling is potentially one of the most innovative approaches to reducing energy density in buildings and industry, as well as achieving higher levels of energy efficiency. Several studies have reported the design of spectrally selective layered structures for daytime passive radiative cooling. However, a comprehensive design of such systems requires the spectral behavior of different materials and radiative heat transfer mechanisms to be addressed together. Here, we introduce a design methodology for daytime passive radiative cooling with thin film filters which accounts for the spectral tailoring at the visible and infrared spectrum. The major difference of this method is that it does not require a predefined target ideal emittance. The results show that higher cooling powers are possible compared to the previously reported thin-film structures, which were designed from a purely spectral perspective. The underlying mechanisms of the resulting spectral profiles, which give rise to improved performance, are investigated by wave impedance analysis. Cooling powers up to 100 W/m(2) are obtained with seven layers on Ag. The findings of this study indicate that structures with better performance in terms of cooling powers and temperature reduction rates can be obtained following the procedure discussed.