Search
Now showing items 21-30 of 65
Comparison of synthetic and steady air jets for impingement heat transfer over vertical surfaces
(IEEE, 2012)
Natural convection air cooling is the method of choice for many low-power electronics applications due to cost, availability, and reliability considerations. This method is not only limited to low-power applications, but ...
Direct liquid cooling of high flux LED systems: hot spot abatement
(ASME, 2013)
With the recent advances in wide band gap device technology, solid-state lighting (SSL) has become favorable for many lighting applications due to energy savings, long life, green nature for environment, and exceptional ...
Thermal and optical performance of eco-friendly silk fibroin proteins as a cavity encapsulation over LED systems
(ASME, 2015)
The demand for high power LEDs for illumination applications is increasing. LED package encapsulation is one of most critical materials that affect the optical path of the generated light by LEDs, and may result in lumen ...
Heat transfer characteristics of impinging steady and synthetic jets over vertical flat surface
(Elsevier, 2015-01)
In this paper, heat transfer characteristics of single-slot impinging steady and synthetic jets on a 25.4-mm × 25.4-mm vertical surface were experimentally investigated. The experiments were conducted with a fixed nozzle ...
Investigation of power distribution on an axial fan
(IEEE, 2016)
Forced convection cooling systems utilize fans which can be axial or radial, small or large in many different configurations. Efficiency of a fan depends on its electrical and mechanical designs as well as the environmental ...
Flow and heat transfer study of an impinging piezoelectric fan over a vertical surface
(ASME, 2016)
Piezoelectric fans are low-form-factor cooling devices, which have gained recent attention for electronics cooling. These devices feature a vibrating blade, which sheds vortices from its tip during its motion. The performance ...
An investigation into flow and heat transfer for a slot impinging synthetic jet
(Elsevier, 2016-09)
According to the latest trends in miniature consumer and military electronics, there is a need for compact cooling solutions to meet performance requirements at compact volumes. Successful technology must feature a thin ...
Predicting heat transfer for low- and high-frequency central-orifice synthetic jets
(IEEE, 2016-04)
As electronic devices are becoming more compact each day, the more effective and efficient active cooling technologies are needed. Microfluidic devices, such as synthetic jets, serve as a potential candidate to fulfill the ...
Thermal performance of a light emitting diode light engine for a multipurpose automotive exterior lighting system with competing board technologies
(ASME, 2017-06-12)
In recent years, light emitting diodes (LEDs) have become an attractive technology for general and automotive illumination systems replacing old-fashioned incandescent and halogen systems. LEDs are preferable for automobile ...
Impact of orifice size over mechanical, flow and thermal performances of synthetic jets
(IEEE, 2018-07-24)
Recent electronic systems require more aggressive cooling solutions due to their high functionality, densely packaged components and localized heating compared to low functionality systems in the last decade. Synthetic ...
Share this page