Show simple item record

dc.contributor.authorMaro, Arda
dc.date.accessioned2023-01-23T11:38:34Z
dc.date.available2023-01-23T11:38:34Z
dc.identifier.urihttp://hdl.handle.net/10679/8049
dc.identifier.urihttps://tez.yok.gov.tr
dc.identifier.urihttps://discover.ozyegin.edu.tr/iii/encore/record/C__Rb6242042?lang=eng
dc.descriptionThesis (M.A.)--Özyeğin University, Graduate School of Sciences and Engineering, Department of Electrical and Electronics Engineering, August 2022.
dc.description.abstractAs the number of electronic devices in our daily lives increases day by day, the risk of electromagnetic interference (EMI) between the devices and between the device and the grid increases. Refrigerators are the only devices found in almost every home and work non-stop. Besides refrigerators have many electrical and electronic components that may contribute to EMI. For this reason, refrigerators have importance in terms of electromagnetic interference. In this study, it is aimed to analyze the impacts of the changes in the cable distribution of a refrigerator and the addition of the ferrite filters on the conducted electromagnetic emission test, which is carried out in accordance with the IEC 55014-1 standard and covers frequencies between 150kHz-30 MHz. For this research, three identical refrigerators were prepared. In the first one, AC and DC cables are fully aligned and entangled, in the second one, AC and DC cables are fully separated and in the third one, AC and DC cables are fully entangled on the refrigerator body but separated inside the control board box. The refrigerator with fully entangled AC and DC cables was chosen as the reference product and conducted electromagnetic emission tests were carried out for phase lines and neutral lines to examine the impact of cable distributions on electromagnetic interference. In addition, ferrite core and amorphous core were added to the AC and DC cable groups in the control board box for filtering the electromagnetic noise, and their impacts on the test results were examined when compared with the reference product which has no filtering. While it was seen that completely separating AC and DC cables improved the test results at almost every frequency, the product with AC and DC cables fully entangled on the refrigerator body but separated inside the control board box failed the test. Whether the filter used is ferrite or amorphous, the location of the filter is AC or DC cables, the results are better than the product without a ferrite filter.en_US
dc.description.abstractGünlük hayatımızda kullandığımız elektronik cihaz sayısı her geçen gün arttıkça cihazlar arasındaki ve cihazlar ile şebeke arasındaki elektromanyetik girişim (EMI) riski de artmaktadır. Buzdolapları hemen hemen her evde bulunan ve hiç durmadan çalışan cihazlardır. Ayrıca buzdolapları elektromanyetik girişime sebep olabilecek çok sayıda elektrikli ve elektronik bileşene sahiptir. Bu nedenle buzdolapları elektromanyetik girişim açısından önem arz etmektedir. Bu çalışmada bir buzdolabının kablo düzenindeki değişimin ve buzdolabına eklenen filtrelerin IEC 55014-1 standardına uygun şekilde yapılan ve 150kHz-30 MHz arasındaki frekansları kapsayan iletim yollu elektromanyetik emisyon testi üzerine etkilerinin incelenmesi amaçlanmıştır. Bu araştırma için AC ve DC kabloları tamamen karışık düzende, AC ve DC kabloları tamamen ayrı düzende ve AC ve DC kabloları buzdolabı gövdesi üzerinde karışık fakat kontrol kartı kutusu içerisinde ayrı düzende olacak şekilde üç adet aynı model buzdolabı hazırlanmıştır. AC ve DC kabloları tamamen karışık yapıda olan ürün referans seçilerek kablo dağılımlarının elektromanyetik girişim üzerindeki etkisini incelemek üzere faz hatları ve nötr hatları için iletim yollu elektromanyetik emisyon testleri yapılmıştır. Ayrıca kontrol kartı kutusu içerisinde bulunan AC ve DC kablo gruplarına filtreleme amaçlı ferrit çekirdek ve amorf çekirdek eklenerek filtresiz referans ürüne göre test sonuçları üzerindeki etkileri incelenmiştir. AC ve DC kabloları tamamen ayırmanın test sonuçlarını hemen hemen her frekansta iyileştirdiği görülürken AC ve DC kabloların gövde üzerinde karışık kontrol kartı kutusu içerisinde ayrı olduğu ürün testten kalmıştır. Ferrit filtre veya amorf filtre kullanımı, AC veya DC konumlandırılmaları fark etmeksizin filtre kullanılmayan referans ürüne göre sonuçları iyileştirmiştir.
dc.language.isoengen_US
dc.rightsrestictedAccess
dc.titleExperimental analysis of the impact of the refrigerator components on conducted electromagnetic interferenceen_US
dc.title.alternativeBuzdolabı komponentlerinin iletim yollu elektromanyetik girişime olan etkilerinin deneysel analizi
dc.typeMaster's thesisen_US
dc.contributor.advisorPoyrazoğlu, Göktürk
dc.contributor.committeeMemberPoyrazoğlu, Göktürk
dc.contributor.committeeMemberDemiroğlu, Cenk
dc.contributor.committeeMemberBarkana, D. E.
dc.publicationstatusUnpublisheden_US
dc.contributor.departmentÖzyeğin University
dc.contributor.ozugradstudentMaro, Arda
dc.relation.publicationcategoryThesis - Institutional Graduate Student


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

  • Master's Theses
    This Collection covers master's thesis produced at Özyeğin University

Show simple item record


Share this page