A stability analysis for the acceleration-based robust position control of robot manipulators via disturbance observer
dc.contributor.author | Sarıyıldız, E. | |
dc.contributor.author | Sekiguchi, H. | |
dc.contributor.author | Nozaki, T. | |
dc.contributor.author | Uğurlu, Regaip Barkan | |
dc.contributor.author | Ohnishi, K. | |
dc.date.accessioned | 2019-03-29T08:47:09Z | |
dc.date.available | 2019-03-29T08:47:09Z | |
dc.date.issued | 2018-10 | |
dc.identifier.issn | 1083-4435 | en_US |
dc.identifier.uri | http://hdl.handle.net/10679/6247 | |
dc.identifier.uri | https://ieeexplore.ieee.org/document/8409314 | |
dc.description.abstract | This paper proposes a new nonlinear stability analysis for the acceleration-based robust position control of robot manipulators by using disturbance observer (DOb). It is shown that if the nominal inertia matrix is properly tuned in the design of a DOb, then the position error asymptotically goes to zero in regulation control and is uniformly ultimately bounded in trajectory-tracking control. As the bandwidth of a DOb and the nominal inertia matrix are increased, the bound of error shrinks, i.e., the robust stability and performance of the position control system are improved. However, neither the bandwidth of the DOb nor the nominal inertia matrix can be freely increased due to practical design constraints, e.g., the robust position controller becomes more noise-sensitive when they are increased. The proposed stability analysis provides insights into the dynamic behavior of DOb-based robust motion control systems. It is theoretically and experimentally proved that non-diagonal elements of the nominal inertia matrix are useful in improving the stability and in adjusting the tradeoff between robustness and noise sensitivity. The validity of the proposal is verified by simulation and experimental results. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | IEEE | en_US |
dc.relation.ispartof | IEEE/ASME Transactions on Mechatronics | |
dc.rights | openAccess | |
dc.title | A stability analysis for the acceleration-based robust position control of robot manipulators via disturbance observer | en_US |
dc.type | Article | en_US |
dc.description.version | Post print | |
dc.peerreviewed | yes | en_US |
dc.publicationstatus | Published | en_US |
dc.contributor.department | Özyeğin University | |
dc.contributor.authorID | (ORCID 0000-0002-9124-7441 & YÖK ID 241209) Uğurlu, Barkan | |
dc.contributor.ozuauthor | Uğurlu, Regaip Barkan | |
dc.identifier.volume | 23 | en_US |
dc.identifier.issue | 5 | en_US |
dc.identifier.startpage | 2369 | en_US |
dc.identifier.endpage | 2378 | en_US |
dc.identifier.wos | WOS:000447942600033 | |
dc.identifier.doi | 10.1109/TMECH.2018.2854844 | en_US |
dc.subject.keywords | Acceleration-based control (ABC) | en_US |
dc.subject.keywords | Disturbance observer (DOb) | en_US |
dc.subject.keywords | Nonlinear stability analysis | en_US |
dc.subject.keywords | Passivity-based control | en_US |
dc.subject.keywords | Robust position control | en_US |
dc.identifier.scopus | SCOPUS:2-s2.0-85049800333 | |
dc.contributor.authorMale | 1 | |
dc.relation.publicationcategory | Article - International Refereed Journal - Institutional Academic Staff |
Files in this item
This item appears in the following Collection(s)
Share this page