Search
Now showing items 1-9 of 9
Investigation of corrosion behavior of carbon steel for petroleum pipeline applications under turbulent flow conditions
(Institute of Information Science, 2020)
This study investigates the corrosion of steel samples immersed in water with a dynamic corrosion setup at different pH values for three different velocities and three different exposure time. The characteristics of material ...
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
(Springer Nature, 2020-08-02)
Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ...
Design sensitivity and optimization of powertrain mount system design parameters for rigid body modes and kinetic energy distributions
(Springer Nature, 2020-08-24)
This study evaluates the influences of the powertrain mount design parameters on the frequencies of powertrain rigid body modes and their kinetic energy distributions (KEDs), which play an important role in the low-frequency ...
Gabor filter-based localization of straight and curved needles in 2D ultrasound images
(TÜBİTAK, 2020)
2D ultrasound (US) is one of the most commonly used medical imaging devices for needle localization in biopsies. However, the produced images are low-resolution and contain an excessive number of artifacts, which makes the ...
Micro-hydrodynamic interaction mechanisms in tio2 nano-colloidal suspensions with different particle size distributions: the effects of electrostatic and steric stabilization
(Bangladesh University of Engineering and Technology, 2020)
Micro-hydrodynamic interaction mechanisms of colloidal particles have important effects on the intrinsic properties and behavior of nano-colloidal suspensions, which in turn affect their different potential applications. ...
Active compliance control reduces upper body effort in exoskeleton-supported walking
(IEEE, 2020-04)
This article presents a locomotion controller for lower limb exoskeletons so as to enable the combined robot and user system to exhibit compliant walking characteristics when interacting with the environment. This is of ...
Formation of nano-sized compounds during friction stir welding of Cu–Zn alloys: effect of tool composition
(Elsevier, 2020-12)
For the first time, the origin of tool composition effect on microstructure and mechanical properties of the friction stir welded joints has been disclosed. For this aim, nanoindentation, orientation image microscopy, and ...
Design and development of a powered upper limb exoskeleton with high payload capacity for industrial operations
(IEEE, 2020-09)
This study presents the hardware development and low level controller structure of an upper-body exoskeleton that is equipped with high torque-to-weight ratio actuators. It is intended to be used in industrial applications. ...
Effect of external stress on the post-aging mechanical properties of rolled magnesium alloys
(TANGER Ltd., 2020)
In the current study the effects of conventional aging and stress aging on the microstructure and mechanical behavior of warm rolled AZ31 magnesium alloy were investigated. Tensile experiments revealed that the ultimate ...
Share this page