Search
Now showing items 1-5 of 5
An experimental and theoretical analysis of vapor-to-liquid phase change on microstructured surfaces
(Elsevier, 2020-09)
In this work, an experimental and a theoretical study was carried out on condensation heat transfer on vertically aligned bare unstructured, micro V-grooved and square-grooved copper substrates. During the experiments, ...
Effect of commercial purity levels on the mechanical properties of ultrafine-grained titanium
(Elsevier, 2011-03-15)
Two grades of commercial purity (CP) titanium (grades 2 and 4) were processed using equal-channel angular extrusion (ECAE) at 300 ◦C and 450 ◦C, respectively. The processing temperatures were the minimum temperatures at ...
Characterization of chemically modified thin films for optimization of metal CMP applications?
(Cambridge University Press, 2013)
Metal CMP applications necessitate the formation of a protective oxide film in the presence of surface active agents, oxidizers, pH regulators and other chemicals to achieve global planarization. Formation and mechanical ...
Evaluation of infection resistance of biological implants through CMP based micro-patterning
(Cambridge University Press, 2012-01)
Biomaterials are widely used for dental implants, orthopedic devices, cardiac pacemakers and catheters. One of the main concerns on using bio-implants is the risk of infection on the materials used. In this study, our aim ...
Simultaneous improvement in strength and ductility of severely deformed niobium alloy
(Elsevier, 2020-11-15)
The present study is on the improved monotonic response of a severely deformed niobium-based alloy. Nb-1Zr alloy was processed at room temperature using equal channel angular extrusion and cold rolling. After 16 passes, a ...
Share this page