Search
Now showing items 21-30 of 32
Impact of orifice location on the mechanical response of side and central orifice synthetic jets
(2018-07-24)
Synthetic jets have been at the focus of a number applications including flow control and thermal management of microelectronics due to their unique characteristics of transferring linear momentum through a flow structure ...
Development of a computational modeling and experimental validation approach for KSF LED packages in a 65” ultra thin LED TV system
(IEEE, 2018-07-24)
The customer expectations in global TV market have changed over the last decade significantly towards a thinner with a higher brightness and a wider color gamut (WCG) TV products. These requirements led to a drastic increase ...
An investigation of performance of synthetic jets emanating from circular, elliptical and rectangular nozzles
(IEEE, 2018-07-24)
Impinging synthetic jets have been considered as a future solution for cooling miniature structures. Synthetic jet performance is sensitive to a number of parameters such as orifice size, orifice shape and nozzle-to-target ...
A comparative study on the junction temperature measurements of LEDs with raman spectroscopy, microinfrared (IR) imaging, and Forward voltage methods
(IEEE, 2018-11)
Energy efficiency, long life, exceptional color, and performance of solid-state light sources have resulted in a rapidly increasing trend in a number of practical applications especially for general lighting after a long ...
The effect of pH on particle agglomeration and optical properties of nanoparticle suspensions
(Elsevier, 2018-11)
Nanoparticle suspensions (NPSs) are used extensively to improve the thermal efficiency of different engineering systems because of their unique thermo-optical properties. NPSs have also been uses in coatings as they improve ...
High temperature characteristics of Al2024/SiC metal matrix composite fabricated by friction stir processing
(Elsevier, 2018-07-25)
In the present study, friction stir processing (FSP) is used for the synthesis of an aluminum metal matrix composite (MMC) reinforced by SiC particles. MMC specimens with reinforced microstructures exhibited significant ...
The effect of interlaminar graphene nano-sheets reinforced e-glass fiber/ epoxy on low velocity impact response of a composite plate
(IOP Publishing, 2018-05)
In this study, we compare the inter-laminar effect of graphene nano-sheets (GNSs) and CNTs on the single and multiple dynamic impact response of E-glass fiber reinforced epoxy composite (GFEP). In the comparisons, raw GFEP ...
Static and dynamic analyses for the exergetic, exergoeconomic and environmental assessment of a high-performance building
(Inderscience Enterprises Ltd., 2018)
This paper presents an exergetic, exergoeconomic and environmental assessment of an existing high-performance building using both static and dynamic analyses. The IEA ECBCS framework is adopted for exergy analysis, whereas ...
Flow visualization and LES simulations inside a chevron type plate heat exchanger
(Begell House Inc., 2018)
An up-scaled model of a single channel of CPHE was used under dynamically similar conditions for the experiments. In experiments, pressure drop measurements and flow visualizations were conducted with aluminum flitter and ...
Free simulation software and library
(Springer, 2018-01-01)
With the advent of powerful computation technologies and efficient algorithms, simulators became an important tool in most engineering areas. The field of humanoid robotics is no exception; there have been numerous simulation ...
Share this page