Search
Now showing items 21-30 of 41
An inverse synthesis method for the determination of effective mechanical properties for additively manufactured aperiodic structures with finite thickness
(IEEE, 2023)
The production of thin-walled structures via Additive Manufacturing is common for thermo-mechanical applications such as heat exchanger cores. However, accurate and efficient models predicting the effective material response ...
Size dependent change of mean square displacement in gold nanocrystals: A molecular dynamics simulation
(Wiley, 2023-11-01)
Thermally activated atomic vibrations significantly decrease the x-ray diffraction intensities of nanocrystalline powders. Hence their quantification is critical for accurate structural characterization of small nanocrystals ...
Effect of processing parameters on the phase transformation of a high temperature copper-based shape memory alloy
(Springer, 2023-11)
In the present study, the influence of the processing parameters on the transformation temperatures and microstructural evolution in a copper-based shape memory alloy was investigated. Five times remelting in identical ...
Mass flow rate control of solenoid-based injectors
(Sage, 2023-09)
This paper presents a mass flow rate control method for solenoid-based injectors in open-loop, i.e. without physical
sensor feedback. Measuring the mass flow rate in injectors is important because the performance of the ...
A new path following scheme: safe distance from obstacles, smooth path, multi-robots
(Springer, 2023-04)
Robot routing is one of the most important topics in mobile robotics. The goal is to find a continuous path from an initial position to an end destination that is collision-free and optimal or near-optimal. Due to the ...
Elevated temperature mechanical characteristics and fracture behavior of a novel beta titanium alloy
(MDPI, 2023-02-03)
In the present work, the elevated-temperature deformation characteristics and microstructural evolution of a Ti-5V-5Mo-5Cr-4Al alloy in solution-treatment conditions were studied under a tensile load at temperatures in the ...
On the strain rate sensitivity of a TRIP assisted high entropy alloy
(Elsevier, 2023-02-15)
In the present work, the strain rate sensitivity is investigated in a novel high entropy alloy with transformation-induced plasticity (TRIP) effect. Herein, it is aimed to reflect the effect of phase constitution on the ...
Üretim parametrelerinin, lazer toz yatağı füzyon yöntemi ile üretilen kafes yapıların çarpılma, boyutsal değişim ve yüzey pürüzlülüğü üzerindeki etkisi
(Gazi Üniversitesi, 2023)
Yüksek ısı transfer kabiliyeti, enerji absorbe edebilme ve ses izolasyonu özelliklerinden dolayı kafes yapılar
havacılık, otomotiv ve biyomedikal sanayii başta olmak üzere birçok alanda kullanılmaktadır. Kafes
yapıların ...
A new sensitivity-based mapping scheme for topology optimization of graded TPMS designs
(Springer, 2023-12)
Graded TPMS topologies display excellent mechanical and thermal properties. Design schemes targeting optimal performance exist, but final reconstructed designs still suffer from performance degradation. To overcome this ...
Investigation of soot formation of ethylene/air jet diffusion flame with rank correlated slw including ethylene and acetylene radiation
(Begell House Inc., 2023)
Radiation is significant, especially in sooting flames. The interaction between radiation and soot considerably affects the combustion regime. Spectral radiation models that account for the radiative effects of sooting ...
Share this page