Search
Now showing items 11-20 of 20
The penetration of acoustic cavitation bubbles into micrometer-scale cavities
(Elsevier, 2016)
The penetration of acoustically induced cavitation bubbles in micrometer-scale cavities is investigated experimentally by means of high-speed photography and acoustic measurements. Micrometer-scale cavities of different ...
High-speed visualization of acoustically excited cavitation bubbles in a cluster near a rigid boundary
(Springer Berlin Heidelberg, 2017)
In the present work, high-speed visualizations at one million frames/s have been used to study the oscillation characteristics of acoustic cavitation bubbles. The bubbles are generated by acoustic cavitation using an ...
A Complete procedure for predicting and improving the performance of HAWT's
(IOP Publishing, 2014)
A complete procedure for predicting and improving the performance of the horizontal axis wind turbine (HAWT) has been developed. The first process is predicting the power extracted by the turbine and the derived rotor ...
A torque matched aerodynamic performance analysis method for the horizontal axis wind turbines
(Wiley, 2013-11)
An analysis method is developed to test the operational performance of a horizontal axis wind turbines. The rotor is constrained to the torque–speed characteristic of the coupled generator. Therefore, the operational ...
From passive to active pitch regulation of wind turbines: Optimization method with numerical validation
(ASME, 2015)
An optimization method that changes the control strategy of the Horizontal Axis Wind Turbine (HAWT) from passive- to active-pitch has been developed. The method aims to keep the rated power constant by adjusting the blade ...
Numerical investigation of the flame location of turbulent premixed combustion in a diffuser burner exposed to various turbulence intensities and turbulence length scales
(Turkish Society of Thermal Science and Technology (TIBTD), 2018)
This study aims to investigate the response of the flame location of a turbulent premixed flame that has been exposed to various turbulence intensities and turbulence length scales. A diffuser-type burner is used to reveal ...
Turbulence impact on wind turbines: experimental investigations on a wind turbine model
(IOP Publishing, 2016)
Experimental investigations have been conducted by exposing an efficient wind turbine model to different turbulence levels in a wind tunnel. Nearly isotropic turbulence is generated by using two static squared grids: fine ...
Influence of turbulent flow characteristics on flame behaviour in diffuser combustors
(Elsevier, 2019-03-01)
The influence of turbulence on flame location in a diffuser-type combustor is the focus of this study. Two types of diffuser combustors were selected to study the influence of turbulence intensity and length scale on flame ...
Experimental and numerical study of rubber flow in the extrusion die of a weather strip
(Society of Chemical Engineers, 2019)
Extrusion is the main method used to produce rubber weather strips in automotive industries, and the quality of the final product largely depends on the thermal properties of the process output. Therefore, precise thermal ...
Flow visualization and LES simulations inside a chevron type plate heat exchanger
(Begell House Inc., 2018)
An up-scaled model of a single channel of CPHE was used under dynamically similar conditions for the experiments. In experiments, pressure drop measurements and flow visualizations were conducted with aluminum flitter and ...
Share this page