Search
Now showing items 81-90 of 231
T-matrix method for modelling optical tweezers
(Taylor & Francis, 2011)
We review the use of the T-matrix description of scattering, or the T-matrix method, for the calculation of optical forces and torques, especially for the computational modelling of optical tweezers. We consider both simple ...
Numerical and experimental analysis of a heat-pipe-embedded printed circuit board for solid state lighting applications
(Taylor & Francis, 2019-01-02)
Thermal management is one of the main issues for electronics cooling especially for tightly packaged PCBs that experience local heat generation. Thus, theoretical and experimental investigations have been conducted to ...
Integrating magnetic heads with plasmonic nanostructures in multilayer configurations
(IEEE, 2013-07)
Heat-assisted magnetic recording (HAMR) is an emerging technology that has increased the areal density of conventional recording techniques for hard disc drives. Integrated heads have enabled this increase through localized ...
Effect of actuator deflection on heat transfer for low and high frequency synthetic jets
(IEEE, 2014)
Synthetic jets are being investigated over the last four decades. Researchers have been interested in its unique applications for a wide range of flow control to thermal management of electronics applications. Synthetic ...
Pool boiling critical heat flux in dielectric liquids and nanofluids
(Elsevier, 2011)
With the recent advances in consumer and power electronics, efficient thermal management of high heat flux components has taken on new urgency. While its inherent advantages have made air cooling the method of choice for ...
Radiative transfer configuration factor catalog: a listing of relations for common geometries
(Elsevier, 2011-03)
An on-line compilation of radiation configuration factors for over 300 common geometries is provided as a supplementary material from the JQSRT web site at doi:10.1016/j.jqsrt.2010.10.002. The factors are gathered from ...
Effect of slurry aging on stability and performance of chemical mechanical planarization process
(Elsevier, 2011-03)
Chemical mechanical planarization (CMP) is known to be one of the most challenging processes in microelectronics manufacturing due to the number of variables involved in the design of the process. In particular, the slurries ...
Hot deformation behavior of ultra-fine grained pure Ti
(Trans Tech Publications, 2013-11)
In the present study, compression tests were performed at a strain rate of 0.001 to 0.1 s(-1) and in the range of 600 degrees C to 900 degrees C to investigate the high temperature deformation behavior and flow stress model ...
An investigation into performance characteristics of an axial flow Fan using CFD for electronic devices
(ASME, 2015)
Rotating fans are widely utilized in thermal management applications and their accurate characterization has recently become even a more critical issue for thermofluids engineers. The present study investigates the ...
Particle size analysis on wide size distribution powders; effect of sampling and characterization technique
(Elsevier, 2015-01)
Particle size distribution of powders plays a very important role in determining the critical chemical and physical properties of the particulate systems. Precise determination of particle size distribution depends on ...
Share this page