Browsing Mechanical Engineering by Title
Now showing items 154-173 of 465
-
Elevated temperature mechanical behavior of severely deformed titanium
(Springer Nature, 2014-05)In this investigation, compression tests were performed at a strain rate of 0.001-0.1 s(-1) in the range of 600-900 degrees C to study the high temperature deformation behavior and flow stress model of commercial purity ... -
Elevated temperature mechanical characteristics and fracture behavior of a novel beta titanium alloy
(MDPI, 2023-02-03)In the present work, the elevated-temperature deformation characteristics and microstructural evolution of a Ti-5V-5Mo-5Cr-4Al alloy in solution-treatment conditions were studied under a tensile load at temperatures in the ... -
Engineering with and for light absorption and scattering: a quarter century of experimental research at RTL
(Accademia Peloritana dei Pericolanti, 2011)Characterization of particles requires detailed understanding of light interaction with homogeneous/inhomogeneous and regular/irregular shaped particles, or fractallike structures, within optically thin or thick media. ... -
Enhanced thermal performance of high flux led systems with two-phase immersion cooling
(IEEE, 2020)Considering significant worldwide use of electricity for general lighting, the implementation of energy efficient technologies is highlighted in many platforms with the use of light emitting diodes (LEDs). Because of its ... -
Enhancing local absorption within a gold nano-sphere on a dielectric surface under an AFM probe
(Elsevier, 2016-07)This study considers enhancing localized absorption by a gold nanoparticle (NP) placed over a substrate where an atomic force microscope (AFM) tip is in close proximity of the particle. The gold NP and AFM tip are interacting ... -
Enhancing the performance of Piezoelectric Energy Harvester under electrostatic actuation using a robust metaheuristic algorithm
(Elsevier, 2023-02)This study proposes a novel shape optimization methodology based on evolutionary algorithms to maximize the harvesting energy from piezoelectric energy harvester stimulated by the β-emitted radioisotope. The parametric ... -
Entropy generation analysis of laminar flows of water-based nanofluids in horizontal minitubes under constant heat flux conditions
(MDPI AG, 2018-04)During the last decade, second law analysis via entropy generation has become important in terms of entropy generation minimization (EGM), thermal engineering system design, irreversibility, and energy saving. In this ... -
Environmental force estimation for a robotic hand : compliant contact detection
(IEEE, 2015)This paper presents a model based compensation method to enable environmental force estimation for a robotic hand with no tactile or force sensors. To this end, we utilize multi-joint robot dynamics and disturbance observer ... -
Error bounds of pair distribution function analysis in characterization of thermal disorder in nanocrystals
(Int Union Crystallography, 2022-08)N/A -
Estimating quantitative features of nanoparticles using multiple derivatives of scattering profiles
(Elsevier, 2011-05)Characterization of nanoparticles on surfaces is a challenging in verse problem whose solution has many practical applications. This article proposes a method, suitable for in situ characterization systems, for estimating ... -
An Eulerian multiphase frost model based on heat transfer measurements
(Elsevier, 2023-12-01)In this paper, a laminar numerical model is developed to predict frost formation over a horizontal cold flat surface. An Eulerian-Eulerian multiphase approach is followed to model humid air and ice phases separately. Frost ... -
Eurotherm conference no. 105: computational thermal radiation in participating media V
(Elsevier, 2016-03)The Eurotherm Seminar No.: 105 on Computational Thermal Radiation in Participating Media was held in Albi, France on 1–3 April 2015. It was the fifth in a series after Mons, Belgium (Eurotherm Seminar No.: 73, April 2003), ... -
Evaluating the accuracy of rietveld analysis for diffraction data from nanocrystalline powders
(International Union of Crystallography, 2022-08)N/A -
Evaluating the mechanical behavior of ARB processed aluminum composites using shear punch testing
(Trans Tech Publications Ltd, 2020)Multi-layered metal composites have received considerable attention due to their improved mechanical and physical properties. In this study, Al6061/Al2024 composite was processed by accumulative roll bonding (ARB) as a ... -
Evaluation of chemical mechanical polishing-based surface modification on 3D dental implants compared to alternative methods
(MDPI AG, 2018-11-15)Chemical mechanical polishing (CMP) has been introduced in previous studies as a synergistic technique to modify the surface chemistry and topography of titanium-based implants to control their biocompatibility. In this ... -
An evaluation of energy efficiency measures in a Turkish campus building for thermal comfort and economic risk
(International Building Performance Simulation Association, 2015)As new and retrofitted Turkish buildings adopt stateof-the-art energy efficiency measures, hidden risks associated with compromised thermal comfort and disappointing returns on investment could go unnoticed unless a building ... -
Evaluation of infection resistance of biological implants through CMP based micro-patterning
(Cambridge University Press, 2012-01)Biomaterials are widely used for dental implants, orthopedic devices, cardiac pacemakers and catheters. One of the main concerns on using bio-implants is the risk of infection on the materials used. In this study, our aim ... -
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
(Springer Nature, 2020-08-02)Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ... -
Existence and stability of traveling waves for a class of nonlocal nonlinear equations
(Elsevier, 2015-05-01)In this article we are concerned with the existence and orbital stability of traveling wave solutions of a general class of nonlocal wave equations: utt−Luxx=B(±|u|p−1u)xx, p>1. The main characteristic of this class of ... -
An experimental and analytical study on the influence of superhydrophobic micro-textured surfaces on liquid wetting phenomena
(Elsevier, 2018-10-20)Controlling dust, particle, gas or liquid attachment or motion over the surfaces is attracting many researchers to reduce losses or reach mission-specific goals. Therefore, researchers have been developing novel surfaces ...
Share this page
