Publication:
Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion

Placeholder

Institution Authors

Research Projects

Journal Title

Journal ISSN

Volume Title

Type

Article

Access

info:eu-repo/semantics/restrictedAccess

Publication Status

published

Journal Issue

Abstract

In this study, pure grade 2 Ti was processed via equal-channel angular extrusion (ECAE) for 8 and 12 passes following route-E at 300 °C. After processing, the microstructural evolution, tensile properties and wear behavior were investigated. ECAE-processed Ti exhibited a significant improvement in strength values with a slight decrease in ductility. However, the wear test results surprisingly showed that the strengthening of titanium by ECAE processing does not lead to the improvement of wear resistance at least for the pressures and sliding distances used in this study. This finding was mainly attributed to the tribochemical reaction leading to oxidative wear with the abrasive effect in Ti. Three distinct regions were formed on the subsurface of CG and UFG Ti after sliding wear, which are the tribolayer including titanium oxide with smeared wear material at the top, a deformed region having material structure oriented along the sliding direction in the middle, and the original unaffected bulk material at the bottom.

Date

2009-08-20

Publisher

Elsevier

Description

Due to copyright restrictions, the access to the full text of this article is only available via subscription.

Keywords

Citation


Page Views

0

File Download

0