Browsing by Author "1"
Now showing items 521-540 of 2849
-
Determining thermal comfort in built environment using computational fluid dynamics simulations
Fidan, Güven (2017-06)In this thesis, three-dimensional time-dependent Thermal Comfort (TC) conditions in an occupied room is investigated and determined. The room is considered with furniture of varying materials (i.e. steel, wood, etc.) and ... -
Developing a BIM-based tool for automated fall safety review
Tekbaş, Gökhan (2020-01-06)Construction sites are globally known to be amongst the most dangerous working environments. Ensuring safety at sites can be difficult because it is not affected by just one parameter; but it is governed by the behavior ... -
Developing a collaborative planning framework for sustainable transportation
Özener, Okan Örsan (Hindawi Publishing, 2014)Currently, as being the highest petroleum consuming sector in the world, transportation significantly contributes to the total greenhouse gas emissions in the world. Road transportation not only is responsible for approximately ... -
Developing a measure for 'connectorship' as a component of engaged leadership
Dastmalchian, A.; Rezac, D.; Muzyka, D. F.; Bayraktar, Seçil; Steinke, C.; Imer, H. P. (Emerald Group Publishing Limited, 2016)Purpose - The purpose of this paper is to report the findings of a mixed methods study that explored how active community engaged and connected managers were in their local and broader communities (engaged leadership, EL). ... -
Developing a standard measurement and calculation procedure for high brightness LED junction temperature
Arık, Mehmet; Kulkarni, K. S.; Royce, C.; Weaver, S. (2014)White light emitting diodes (LEDs) are appearing in general illumination applications. Clusters of such LEDs can replace an incandescent light bulb of equal luminosity on the merit of considerably low power consumption. ... -
Developing the vocabulary strand of an EAP program
Baykan, Özlem (2015-04-13)This talk will focus on a project carried out to develop the lexical syllabus of an EAP program. The aim is to explain how this project helped the program to define the lexical items needed for EAP studies, how these items ... -
Development and control of a parallel endoscopic surgical robot platform for beating heart procedures
Ersoy, Onur (2021-06-16)Minimally Invasive Robotic Surgery focuses on performing surgeries using advanced robotic tools through small incisions. Taking advantage of these advanced tools and control methods, challenging surgeries such as ... -
Development and evaluation of an interface for pre-operative planning of cryoablation of a kidney tumor
Barkana, D. E.; Duru, D. G.; Duru, A. D.; Açık, Alper; Özkan, M. (2013)Surgical interfaces are used for the interpretation and quantification of the patient information, and for the presentation of an integrated workflow where all available data are combined to enable optimal treatments. Human ... -
Development of a computational modeling and experimental validation approach for KSF LED packages in a 65” ultra thin LED TV system
Elibol, M.; Özaydın, M. Ç.; Arık, Mehmet (IEEE, 2018-07-24)The customer expectations in global TV market have changed over the last decade significantly towards a thinner with a higher brightness and a wider color gamut (WCG) TV products. These requirements led to a drastic increase ... -
Development of a solid state spot welding technique for the manufacturing of detect free joints
Bajilane, Isam Jabbar Ibrahim (2019-06)Development of a Solid State Spot Welding Technique for the Manufacturing of Defect Free Joints.--Friction stir spot welding (FSSW) processing is a recently developed process for joining hard weldability materials, which ... -
Development of a torque-controllable lower extremity exoskeleton for crutch-free 3D walking support
Yıldırım, Mehmet Can (2018-12-24)Spinal cord paralysis is a condition, which is formed due to full or partial loss of sensorimotor and autonomous functionalities of the spinal cord. Paraplegia is a type of spinal cord injury which causes functionality ... -
Development of a torque-controllable upper limb exoskeleton for industrial applications
Chronic upper body pain and injuries are undesirable physical disorders that result from regular exposure to external forces that strain the musculoskeletal system. These symptoms reduce both the quality of life and ... -
Development of an accelerated Monte Carlo ray tracing based radiation heat transfer solver
Siddiqui, Faizan Pervez (2017-07)The Monte Carlo ray tracing (MCRT) is a semi-analytical stochastic method for the solution of radiative transfer equation (RTE). However, its high computation cost prevents its extensive use. In this study, an accelerated ... -
Development of an antagonistically actuated smart joint
Vahidyeganeh, Ali; Şimsek, Görkem Muttalip; Jabeen, Saher; Bebek, Özkan; Yapıcı, Güney Güven (Trans Tech Publications, 2017)Shape memory alloys with their phase transformation properties; have been broadly implemented in smart structures. In this study, a functional design is presented where two wires actuate antagonistically to achieve motion ... -
Development of antagonistically actuated active joints with shape memory aloys
Vahidyeganeh, Ali (2017-01)The focus of this research work is the development of an active joint antagonistically actuated by shape memory alloys (SMA). Due to their high force to mass ratio these identified as excellent actuator candidates for ... -
Development of lower bounds for the scheduling of setup tasks in serial production lines
Pessan, C.; Neron, E.; Haouari, Mohamed (Inderscience Publishers, 2013)Efficient production resettings are necessary to achieve production flexibility. For this reason, it is of primary importance to reduce the setup time required to switch the production from one product type to another, and ... -
Development of multifunctional tick repellent textiles
Akbar, Wazir (2016-09)This thesis focuses on smart textile manufacturing with tick repellency through encapsulation of the natural extracts and applying them onto the fabric surfaces. Tick-borne encephalitis (TBE) is a human viral infectious ... -
Development of nano structured photo-catalytic textile materials
Cerhan, Asena (2017-07)This study focuses on assisting problems which have delayed the commercialization of the photocatalytic textile applications by the following innovative technological developments related to photocatalytic compounds; (i) ... -
Development of novel methodologies for rotational dynamics applications
Abbasi, Ahmad (2020-12-31)In this thesis, a novel methodology is proposed to determine the parameters of a rotating unbalance in a rotor-bearing system. For that purpose, the weighted sum of squared difference between the analytical and predicted ... -
Development of novel methodologies for the damage detection in mechanical systems
Firoozi, Behnam (2020-12-31)The present study examines the capability of various optimization algorithms and proposes novel hybrid algorithms for the more precise prediction of open-edge cracks in mechanical systems. The natural frequencies of the ...
Share this page