Fabrication and mechanical characterization of polypropylene clay nanocomposites
dc.contributor.author | Zakaria, A. Z. | |
dc.contributor.author | Salahi, Salar | |
dc.contributor.author | Yapıcı, Güney Güven | |
dc.date.accessioned | 2023-05-24T10:37:27Z | |
dc.date.available | 2023-05-24T10:37:27Z | |
dc.date.issued | 2021 | |
dc.identifier.isbn | 978-303573835-3 | |
dc.identifier.issn | 1013-9826 | en_US |
dc.identifier.uri | http://hdl.handle.net/10679/8334 | |
dc.identifier.uri | https://www.scientific.net/KEM.882.107 | |
dc.description.abstract | Investigating the influence of process parameters is vital to enhance the mechanical properties of nanoparticle reinforced polymer composites. Nanocomposites of polypropylene/nanoclay are prepared by the extrusion method. To characterize the mechanical response of nanocomposites over different compounding ratios, samples are prepared with 5 and 10 wt%. Effects of re-extrusion and (PP-g-MA) compatibilizer on the tensile performance of nanocomposites were evaluated at different strain rates. X-ray diffraction evaluation of compounds indicated that re-extrusion is an important factor in increasing the exfoliation degree. Results show that improvement in the exfoliation degree enhances the tensile modulus, without significant influence on the tensile strength. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Trans Tech Publications Ltd | en_US |
dc.relation.ispartof | Key Engineering Materials | |
dc.rights | restrictedAccess | |
dc.title | Fabrication and mechanical characterization of polypropylene clay nanocomposites | en_US |
dc.type | Conference paper | en_US |
dc.publicationstatus | Published | en_US |
dc.contributor.department | Özyeğin University | |
dc.contributor.authorID | (ORCID 0000-0001-5692-4809 & YÖK ID 163236) Yapıcı, Güven | |
dc.contributor.ozuauthor | Yapıcı, Güney Güven | |
dc.identifier.volume | 882 KEM | en_US |
dc.identifier.startpage | 107 | en_US |
dc.identifier.endpage | 113 | en_US |
dc.identifier.doi | 10.4028/www.scientific.net/KEM.882.107 | en_US |
dc.subject.keywords | Exfoliation | en_US |
dc.subject.keywords | Extrusion | en_US |
dc.subject.keywords | Mechanical behavior | en_US |
dc.subject.keywords | Nanoclay | en_US |
dc.subject.keywords | Nanocomposites | en_US |
dc.subject.keywords | Strain rate | en_US |
dc.identifier.scopus | SCOPUS:2-s2.0-85106185486 | |
dc.relation.publicationcategory | Conference Paper - International - Institutional Academic Staff and Graduate Student |
Files in this item
Files | Size | Format | View |
---|---|---|---|
There are no files associated with this item. |
This item appears in the following Collection(s)
Share this page