Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
dc.contributor.author | Şimşek, Görkem Muttalip | |
dc.contributor.author | Ipekoglu, M. | |
dc.contributor.author | Yapıcı, Güney Güven | |
dc.date.accessioned | 2020-11-16T12:17:59Z | |
dc.date.available | 2020-11-16T12:17:59Z | |
dc.date.issued | 2020-08-02 | |
dc.identifier.issn | 0947-8396 | en_US |
dc.identifier.uri | http://hdl.handle.net/10679/7102 | |
dc.identifier.uri | https://link.springer.com/article/10.1007/s00339-020-03847-1 | |
dc.description.abstract | Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The major problem associated with the use of NiTi for in-vivo applications is the potential risk of Ni release from the implant surface due to the corrosive environment of the body. Various methods including surface treatment techniques with acid and alkali solutions and application of biocompatible coatings have been used to overcome these difficulties. In particular, NaOH pre-treatment has been commonly performed for surface activation of the substrate material to enhance the adhesion properties of coatings. The present work investigates the effect of NaOH pre-treatment on the hydroxyapatite (HA) coating and the resulting corrosion behavior of and cell response to HA coated NiTi wires. Microstructural examinations showed that the coating integrity deteriorated with prior NaOH treatment which also increased the corrosion rate as evidenced by potentiodynamic measurements. XPS analysis revealed heightened Ni levels on the sample surfaces and cytotoxicity tests showed decreased cell viability for the samples with pre-treatment. Absence of NaOH pre-treatment led to lower contact angle values pointing to higher biocompatibility. | en_US |
dc.description.sponsorship | Ozyegin University | |
dc.language.iso | eng | en_US |
dc.publisher | Springer Nature | en_US |
dc.relation.ispartof | Applied Physics A | |
dc.rights | openAccess | |
dc.title | Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy | en_US |
dc.type | Article | en_US |
dc.peerreviewed | yes | en_US |
dc.publicationstatus | Published | en_US |
dc.contributor.department | Özyeğin University | |
dc.contributor.authorID | (ORCID 0000-0001-5692-4809 & YÖK ID 163236) Yapıcı, Güven | |
dc.contributor.ozuauthor | Yapıcı, Güney Güven | |
dc.identifier.volume | 126 | en_US |
dc.identifier.issue | 8 | en_US |
dc.identifier.wos | WOS:000559294400001 | |
dc.identifier.doi | 10.1007/s00339-020-03847-1 | en_US |
dc.subject.keywords | NiTi | en_US |
dc.subject.keywords | Coating | en_US |
dc.subject.keywords | Hydroxyapatite | en_US |
dc.subject.keywords | Corrosion | en_US |
dc.subject.keywords | Cell viability | en_US |
dc.subject.keywords | Surface wettability | en_US |
dc.identifier.scopus | SCOPUS:2-s2.0-85088877508 | |
dc.contributor.ozugradstudent | Şimşek, Görkem Muttalip | |
dc.contributor.authorMale | 2 | |
dc.relation.publicationcategory | Article - International Refereed Journal - Institutional Academic Staff and PhD Student |
Files in this item
This item appears in the following Collection(s)
Share this page