Mechanical Engineering: Recent submissions
Now showing items 81-100 of 465
-
Benchmark study of 2D and 3D VOF simulations of a simplex nozzle using a hybrid RANS-LES approach
(Elsevier, 2022-07-01)In this study, a simplex nozzle is tested with water for the benchmarking of different flow simulation models. A large scale Plexi-glass transparent nozzle is used to reduce the influence of production tolerances on the ... -
Effect of build parameters on the compressive behavior of additive manufactured CoCrMo lattice parts based on experimental design
(MDPI, 2022-07)Due to their high specific strength, toughness, and corrosion and wear resistance characteristics, CoCrMo alloys are widely used in different industries and applications: wind turbines and jet-engine components, orthopedic ... -
Determining the structural life of an electric vehicle battery from road loads
(Walter de Gruyter, 2022-07)Although the electrical system is important in the development of electric vehicles, the durability of the battery system against mechanical loads and the performance of the battery against shock reactions are just as ... -
Machine learning to predict junction temperature based on optical characteristics in solid-state lighting devices: A test on WLEDs
(MDPI, 2022-08)While junction temperature control is an indispensable part of having reliable solid-state lighting, there is no direct method to measure its quantity. Among various methods, temperature-sensitive optical parameter-based ... -
A new deep learning restricted boltzmann machine for energy consumption forecasting
(MDPI, 2022-08)A key issue in the desired operation and development of power networks is the knowledge of load growth and electricity demand in the coming years. Mid-term load forecasting (MTLF) has an important rule in planning and ... -
Dynamic opto-electro-thermal characterization of solid state lighting devices: measuring the power conversion efficiency at high current densities
(IOP Publishing, 2022-09-22)Solid state lighting devices with high power densities require accurate characterization, as the rise of chip temperature impacts its optical, electrical, and lifetime characteristics. A detailed experimental study is ... -
On the friction stir processing of additive-manufactured 316L stainless steel
(Wiley, 2022-10)The novel combination of friction stir processing (FSP) and additive manufacturing (AM) is studied herein. Laser-based powder bed fusion of metals (PBF-LB/M) is used to establish 316 L stainless steel with a bimodal ... -
Discrete phase analysis of self heating particles over an immersion liquid cooled high power blue light-emitting diode with suspended phosphor particles
(ASME, 2022-10)In recent years, the interaction of unrestricted particles with dispersed multiphase flows has been linked to a number of important engineering applications. Among these applications, the novel idea of immersion-cooled ... -
A critical review on the junction temperature measurement of light emitting diodes
(MDPI, 2022-10)In the new age of illumination, light emitting diodes (LEDs) have been proven to be the most efficient alternative to conventional light sources. Yet, in comparison to other lighting systems, LEDs operate at low temperatures ... -
A comparative evaluation of sepiolite and nano-montmorillonite on the rheology of cementitious materials for 3D printing
(Elsevier, 2022-10-03)Through the last decade, methods of digital manufacturing of concrete gained a significant interest compared to conventional concrete. The main challenge in additive manufacturing (3D printing) is to design a highly ... -
Effect of a multi-phase structure on the damping response of a novel high entropy alloy
(Elsevier, 2022-12-01)In this study, dynamic behavior of a novel multi-phase high entropy alloy (HEA) was investigated. Thermo-mechanical processes containing an 80 % thickness reduction at room temperature rolling followed by annealing at 750 ... -
A comparative study on phenomenological and artificial neural network models for high temperature flow behavior prediction in Ti6Al4V alloy
(Elsevier, 2022-12)Due to its critical use in lightweight components requiring elevated temperature operation, it is very important to determine and model the high temperature thermomechanical flow behavior of Ti6Al4V. In this study, uniaxial ... -
Parametric effects on pool boiling heat transfer and critical heat flux: A critical review
(ASME, 2022-12)Pool boiling heat transfer offers high-performance cooling opportunities for thermal problems of electronics limited with high heat fluxes. Therefore, many researchers have been extensively studying over the last six ... -
Mechanical behavior of constrained groove pressed stainless steel and pure zinc
(Trans Tech Publications Ltd, 2021)Constrained groove pressing (CGP), a severe plastic deformation method, has been implemented on AISI 304 and commercially pure zinc samples in the present work. Four CGP passes were successfully applied to both materials ... -
Effects of aging on the microstructure and phase transformation behavior of cu-al-mn shape memory alloy
(Trans Tech Publications Ltd, 2021)In the present study, the effects of artificial aging heat treatment on the transformation temperatures and hardness of Cu-Al-Mn shape memory alloy have been investigated. The aging processes have been performed on the ... -
Manufacturing and mechanical behavior of titanium-steel composite by accumulative roll bonding
(Trans Tech Publications Ltd, 2021)Metal matrix composites have attracted interest for use in several engineering applications and this study focuses on the fabrication titanium and interstitial free steel composite and its mechanical performance. Accumulative ... -
Fabrication and mechanical characterization of polypropylene clay nanocomposites
(Trans Tech Publications Ltd, 2021)Investigating the influence of process parameters is vital to enhance the mechanical properties of nanoparticle reinforced polymer composites. Nanocomposites of polypropylene/nanoclay are prepared by the extrusion method. ... -
Effect of the motion pattern on the turbulence generated by an active grid
(Springer, 2021)In the field of turbulence research, many experiments are performed using turbulence generated under reproducible conditions. In the past mostly static grids having a fixed blockage were adopted, but in order to generate ... -
Challenges and solutions for application and wider adoption of wearable robots
(Cambridge University Press, 2021)The science and technology of wearable robots are steadily advancing, and the use of such robots in our everyday life appears to be within reach. Nevertheless, widespread adoption of wearable robots should not be taken for ... -
Solid state routes for composite materials production
(Elsevier, 2021)Solid-state methods are frequently used to fabricate metal matrix composites, which usually lead to superior mechanical properties compared to liquid state routes. In this article, different solid-state routes including ...
Share this page