Search
Now showing items 431-440 of 465
The effect of interface gradient distribution on unrealistic flow in 3D droplet simulations
(Europe, Institute for Liquid Atomization and Spray Systems, ILASS, 2021-08-31)
The purpose of this study is to investigate the origin of the parasitic current to provide accurate prediction of droplet surface interactions in Volume of Fluid (VOF) framework. The deformation of the droplet due to ...
Design and development of a torsion-based series elastic actuator with nested encoders for a wearable exoskeleton robot
(IEEE, 2022)
This paper presents the design of a high torque-to-mass ratio series elastic actuator (SEA) for wearable powered exoskeletons. Nonbackdrivable actuators are ideal for applications that require high torque. Commonly, active ...
Influence of turbulent flow characteristics on flame behaviour in diffuser combustors
(Elsevier, 2019-03-01)
The influence of turbulence on flame location in a diffuser-type combustor is the focus of this study. Two types of diffuser combustors were selected to study the influence of turbulence intensity and length scale on flame ...
Formation of nano-sized compounds during friction stir welding of Cu–Zn alloys: effect of tool composition
(Elsevier, 2020-12)
For the first time, the origin of tool composition effect on microstructure and mechanical properties of the friction stir welded joints has been disclosed. For this aim, nanoindentation, orientation image microscopy, and ...
Impact of functional nanofluid coolant on radiator performance
(ASME, 2019-08)
While a number of liquids are preferred in many heating and cooling applications, their thermal capacity can be a limiting factor in many thermal systems. Therefore, a series of methods such as use of mixtures of two or ...
Recent advances in simulating gas permeation through MOF membranes
(Royal Society Publishing, 2021-08-21)
In the last two decades, metal organic frameworks (MOFs) have gained increasing attention in membrane-based gas separations due to their tunable structural properties. Computational methods play a critical role in providing ...
The effect of interlaminar graphene nano-sheets reinforced e-glass fiber/ epoxy on low velocity impact response of a composite plate
(IOP Publishing, 2018-05)
In this study, we compare the inter-laminar effect of graphene nano-sheets (GNSs) and CNTs on the single and multiple dynamic impact response of E-glass fiber reinforced epoxy composite (GFEP). In the comparisons, raw GFEP ...
Numerical assessment of the factors controlling the acoustic response of wind turbine blades
(Canadian Acoustical Association, 2019)
The blades of wind turbine are the most critical parts of the wind turbine system, which contribute to noise generated by wind turbine due to excitation from air streams across them. In this numerical study, the effect of ...
Design and development of a powered upper limb exoskeleton with high payload capacity for industrial operations
(IEEE, 2020-09)
This study presents the hardware development and low level controller structure of an upper-body exoskeleton that is equipped with high torque-to-weight ratio actuators. It is intended to be used in industrial applications. ...
Effect of external stress on the post-aging mechanical properties of rolled magnesium alloys
(TANGER Ltd., 2020)
In the current study the effects of conventional aging and stress aging on the microstructure and mechanical behavior of warm rolled AZ31 magnesium alloy were investigated. Tensile experiments revealed that the ultimate ...
Share this page