Search
Now showing items 1-10 of 14
Heat transfer enhancement with actuation of magnetic nanoparticles suspended in a base fluid
(AIP, 2012)
In this study, we have experimentally demonstrated that heat transfer can be substantially increased by actuating magnetic nanoparticles inside a nanofluid. In order to materialize this, we have utilized a miniature heat ...
Silver patterning using an atomic force microscope tip and laser-induced chemical deposition from liquids
(AIP Publishing, 2012)
This article presents a new direct patterning technique in which laser photoreduction of silver from a liquid is controlled by a scanning atomic force microscope tip. Contrary to expectations, the tip suppresses, rather ...
Predicting heat transfer from unsteady synthetic jets
(ASME, 2012-05-31)
Synthetic jets are piezo-driven, small-scale, pulsating devices capable of producing highly turbulent jets formed by periodic entrainment and expulsion of the fluid in which they are embedded. The compactness of these ...
Advanced slurry formulations for new generation chemical mechanical planarization (CMP) applications
(Cambridge University Press, 2012-01)
Chemical Mechanical Planarization (CMP) is widely used to ensure planarity of metal and dielectric surfaces to enable photolithography and hence multilevel metallization in microelectronics manufacturing. The aim of this ...
Hierarchical reliability assessment models for novel LED-based recessed down lighting systems
(Springer Science+Business Media, 2012)
This chapter describes development of hierarchical reliability assessment models for novel LED-based lighting systems. Much of the chapter is excerpted from references (Arik et al., IEEE Trans Compon Packag Tech 33:668–679, ...
Comparison of synthetic and steady air jets for impingement heat transfer over vertical surfaces
(IEEE, 2012)
Natural convection air cooling is the method of choice for many low-power electronics applications due to cost, availability, and reliability considerations. This method is not only limited to low-power applications, but ...
Biomaterials applications of chemical mechanical polishing
(IEEE, 2012)
Chemical Mechanical Polishing (CMP) is used in semiconductor industry to enable planarization of the interlayer dielectrics and metals. In this study, CMP is used as a polishing technique to modify the surface roughness ...
The cauchy problem for a one-dimensional nonlinear elastic peridynamic model
(Elsevier, 2012-04-15)
This paper studies the Cauchy problem for a one-dimensional nonlinear peridynamic model describing the dynamic response of an infinitely long elastic bar. The issues of local well-posedness and smoothness of the solutions ...
Evaluation of infection resistance of biological implants through CMP based micro-patterning
(Cambridge University Press, 2012-01)
Biomaterials are widely used for dental implants, orthopedic devices, cardiac pacemakers and catheters. One of the main concerns on using bio-implants is the risk of infection on the materials used. In this study, our aim ...
Credible intervals for nanoparticle characteristics
(Elsevier, 2012-01)
Solving the inverse problem of nanoparticle characterization has the potential to advance science and benefit society. While considerable progress has been made within a framework based on the scattering of surface ...
Share this page