Search
Now showing items 271-280 of 508
Microstrip patch antenna design with unified cornered rectangles
(IEEE, 2016)
In this design, high-gain, directional microstrip patch antenna works at 11.1 GHz, which is in Ku-Band satellite receive frequency band. Our design has 3 nested rectangular patches which are cornered. As a result, the input ...
Analysis of ALTO protocol over P2P networks
(2012-10)
Currently, for distributed applications such as Peer-to-Peer (P2P) and Content Delivery Networks (CDNs), the most important challenge is to determine the optimal peer or node selection process, since it sometimes causes ...
Comparison of text-independent speaker verification systems in a multi-class, semi-automatic detection scenario
(2013-06)
Performance of the speaker veri cation systems is typically measured based on their binary decision accuracy. Soft outputs of the systems are used mostly for calibration or multiple system combination purposes. However, ...
15-15-0747-00-007a-tg7r1-cirs-channel-model-document-for-high-rate-pd-communications
(IEEE, 2015-11-14)
The LiFi channels developed by Prof. Murat Uysal and Mr. Miramirkhani were selected as the "LiFi Reference Channel Models" by the IEEE 802.15.7r Task Group during the IEEE's latest meeting held in Bangkok, Thailand, in ...
Guest editorial: Optical wireless communications
(IEEE, 2015-09)
Optical wireless communication (OWC) systems provide many advantages over radio frequency (RF) wireless technologies in some scenarios, including significantly higher data rates and a large amount of available license-free ...
Broadcasting brake lights with MIMO-OFDM based vehicular VLC
(IEEE, 2016)
Inter-vehicular connectivity to enhance road safety and enable highly autonomous driving is increasingly becoming popular. Despite the prevalent works on radio-frequency (RF) based vehicular communication schemes, visible ...
Design and simulation of antenna with defected ground plane
(IEEE, 2016)
In this work a patch antenna having defected ground plane is designed and simulated. Design includes two dielectric layers and some modifications at the top layer such as having a slit and a slot. Simulation results are ...
Signal to noise ratio optimization for a CMUT based medical ultrasound imaging system
(IEEE, 2015)
CMUTs offers key performance benefits compared to their piezoelectric counterparts. However, CMUTs are not widely adopted in commercial ultrasound imaging systems due to low signal to noise ratio (SNR) in the obtained ...
Performance of MIMO enhanced unipolar OFDM with realistic indoor visible light channel models
(IEEE, 2016)
Visible light communication (VLC) involves the dual use of illumination infrastructure for high speed wireless access. Designing such optical based communication systems, realistic indoor optical channel modeling becomes ...
A prism-based non-linear optical readout method for MEMS cantilever arrays
(Elsevier, 2016-10-15)
This paper demonstrates the use of a single right-angle prism for the optical readout of micro-electro-mechanical systems (MEMS) cantilever arrays. The non-linear reflectivity arisen from the internal reflection at the ...
Share this page