Now showing items 22-41 of 127
-
A comparison study between 1D and 2D site response analyses based on observed earthquake acceleration records
(Springer, 2023)The objective of the present work is to evaluate the necessity of 2D site response analysis based on the comparison among the peak ground and spectral accelerations recorded by Istanbul Rapid Response Network and Istanbul ... -
A comparison study between 1D and 3D site response analyses based on observed earthquake acceleration records…
(National Technical University of Athens, 2023)The characteristics of the site conditions have a very significant influence on the variation of building damage during earthquakes, thus, it is essential to evaluate and analyse the effects of site conditions. One option ... -
Composite cold-formed steel rubberised concrete building framed systems
(Avestia Publishing, 2022)In this research, with the use of cold-formed steel (CFS) sections in-filled with rubberized concrete (RuC), a new low-carbon construction system is developed and assessed for its structural resilience and environmental ... -
A computational workflow for rupture‐to‐structural‐response simulation and its application to Istanbul
(Wiley, 2020-10)Scenario-based earthquake simulations at regional scales hold the promise in advancing the state-of-the-art in seismic risk assessment studies. In this study, a computational workflow is presented that combines (i) a ... -
A cost-benefit analysis of sensor quality and spatial density for rapid regional post-event seismic damage assessment: Application to Istanbul
(Elsevier, 2022-12)A quantitative evaluation of the influence of sensor quality and spatial density on the results of rapid regional seismic damage evaluations of buildings can provide an important reference for the deployment of a strong-motion ... -
Crack remediation in mortar via biomineralization: effects of chemical admixtures on biogenic calcium carbonate
(Elsevier, 2018-11-30)Limited research on biomineralization in cement-based systems suggested that self-healing of surface cracks could be obtained by triggering biogenic calcium carbonate (CaCO3) precipitation within the cracks. While this is ... -
Çimento-esaslı harçlarda kendiliğinden iyileşmenin sağlanması için 2 bileşenli biyolojik katkı maddesinin geliştirilmesi
(Gazi Üniversitesi, 2021)Purpose: Throughout the literature, studies showed that among several alternatives such as diatomaceous earth (DE), metakaolin, zeolites and expanded clay could be suitable for protection of the bacteria based on their ... -
Design method for quantifying embankment safety against lateral spreading and determining contribution of basal reinforcements
(Elsevier, 2020-06)This study proposes an analytical method for the calculation of the safety factor against lateral spreading in embankments, both for cases with and without basal reinforcement. Hence, a new limit equilibrium approach is ... -
Design of energy-efficient white portland cement mortars for digital fabrication
(Springer, 2020)Additive manufacturing, i.e. three-dimensional (3D) printing technology has many advantages over traditional processes and the related technology is continuously improving. This study aims to develop an energy- efficient ... -
Designing façade and envelope for a high-rise residential building using energy-efficient materials: A case in Istanbul, Turkey
(IOP Publishing, 2022)The construction industry is responsible for 40% of global energy demand as buildings increase heating, cooling, and lighting demand. Therefore, building energy performance has become one of the most significant subjects ... -
Designing redundant cable-driven parallel robots for additive manufacturing using end-effector compliance index
(IEEE, 2023)This paper presents a methodology for optimizing cable anchor points for cable-driven parallel robots (CDPRs) for specific additive manufacturing tasks. Much of a CDPR's workspace is generally not used for printing tasks. ... -
Development of composite cold-formed steel-rubberised concrete semi-rigid moment-resisting connections
(Elsevier, 2022-06)This paper presents the development of a composite cold-formed steel (CFS)-rubberised concrete (RuC) semi-rigid moment-resisting connection suitable for framed building structures. The connection comprises built-up tubular ... -
Editorial and welcome to a new ERA
(Springer International Publishing, 2015-01)With this first issue of Volume 13 (2015), while we are celebrating our 12th anniversary, we will be implementing some major changes for BEE. We are going to start publishing on a monthly basis with 12 issues per year and ... -
Effect of flexural demands in the leaner columns on the column buckling strength
(Earthquake Engineering Research Institute, 2018)Leaner columns of steel frames are typically designed for axial load only and they are assumed not to contribute to the lateral stiffness of the system; however, a recent study revealed that under seismic loading leaner ... -
The effect of triaxiality on finite element deletion strategies for simulating collapse of full-scale steel structures
(Elsevier, 2020-05-01)Collapse prediction of steel structures should incorporate a finite element model that accounts for ductile fracture through material separation in critical structural members. Finite element deletion approaches have been ... -
Effects of oil contamination and bioremediation on geotechnical properties of highly plastic clayey soil
(Elsevier, 2021-06)Leakage of oil and its derivatives into the soil can change the engineering behavior of soil as well as cause environmental disasters. Also, recovering the contaminated sites into their natural condition and making ... -
Effects of unbonded steel layout on seismic behavior of post-tensioned precast concrete shear walls
(Springer Nature, 2020-10)Unbonded post-tensioned precast connections have been studied widely in various applications and shown to be promising seismic resisting systems with superior seismic performance including exceptional self-centering ... -
End-of-life materials used as supplementary cementitious materials in the concrete industry
(MDPI, 2020-04)A sustainable solution for the global construction industry can be partial substitution of Ordinary Portland Cement (OPC) by use of supplementary cementitious materials (SCMs) sourced from industrial end-of-life (EOL) ... -
Energy-based sidesway collapse fragilities for ductile structural frames under earthquake loadings
(Elsevier, 2018-11)In assessing the likelihood of structural collapse under strong earthquake motions, uncertainties in structural properties and ground motions can be incorporated by use of a probabilistic analysis framework in conjunction ... -
Estimating roadway horizontal alignment from geographic information systems data: An artificial neural network–based approach
(ASCE, 2023-11-01)Estimating horizontal alignment using discretized roadway data points, such as GIS maps, is complicated because the number of curved and tangent segments and their start and end points are not known a priori. This study ...
Share this page
