Search
Now showing items 1-9 of 9
Effect of polymer coating on vapor condensation heat transfer
(ASME, 2020-04-01)
Condensation heat transfer coefficients (HTCs) are rather low compared to thin film evaporation. Therefore, it can be a limiting factor for designing heat transfer equipment. In this work, heat transfer characteristics of ...
On the individual droplet growth modeling and heat transfer analysis in dropwise condensation
(IEEE, 2021-10)
The low convective coefficient at condenser part of spreaders and vapor chambers due to film blanket blocking encourages utilizing dropwise condensation (DWC). Challenges exist in the experimental characterization of DWC, ...
Synthetic jet cooling technology for electronics thermal management - A critical review
(IEEE, 2021-08)
Effective removal of excess heat from electronics equipment is the key to its intended functionality. A Defense Advanced Research Projects Agency (DARPA) hard problem is proposed in microtechnologies for the air-cooled ...
Acoustics and heat transfer characteristics of piezoelectric driven central orifice synthetic jet actuators
(Taylor & Francis, 2022-09-19)
Growth in computational capacity combined with a decrease in the size of digital devices has led to increasing demand for more active and efficient cooling of electronics. In this study, an experimental investigation into ...
An experimental study on the heat transfer and wettability characteristics of micro-structured surfaces during water vapor condensation under different pressure conditions
(Elsevier, 2021-01)
In this study, condensation characteristics of water vapor on micro-structured surfaces at different pressures and subcooling temperature has been investigated experimentally. This work represents a basic study in order ...
Pool boiling heat transfer in dielectric fluids and impact of surfaces on the repeatability
(ASME, 2022)
This study presents an experimental investigation on the nucleate boiling heat transfer (NBHT) in deionized (DI) water and HFE-7100 on bare copper surfaces. The experiments were performed under atmospheric condition at 0 ...
Saturated and superheated water vapor condensation on a custom micro-textured surface
(IEEE, 2023)
Condensation has a great importance for a large number of technologies such as heat exchangers, distillation columns, heat pipes, and thermal management systems. Vapor changes its phase into liquid when it contacts a surface ...
Direct numerical simulation of synthetic jet coupled to forced convection cooling in a channel flow
(IEEE, 2023)
A synthetic jet (SJ) is a microfluidic device that uses the 'zero-net-mass-flux' concept to create a compact cooling solution and provide a net positive momentum flux to the local environment. SJs have been studied extensively ...
Impact of oxidation on pool boiling heat transfer performance over flat plates exposed to extended operating conditions
(IEEE, 2023)
Phase change heat transfer is utilized in a number of high heat flux applications. In order to ensure reliable functionality at moderate temperatures, one has to guarantee a stable long-term operation. In this experimental ...
Share this page