Browsing Mechanical Engineering by Title
Now showing items 206-225 of 465
-
Gradient-based optimization of micro-scale pressurized volumetric receiver geometry and flow rate
(Elsevier, 2023-02)This study focuses on the design optimization of a micro-scale pressurized volumetric receiver by changing geometry and flow rate constrained by the volume, outlet air temperature, and outer surface temperature. The ... -
Graphene as a piezoresistive material in strain sensing applications
(MDPI, 2022-01-12)High accuracy measurement of mechanical strain is critical and broadly practiced in several application areas including structural health monitoring, industrial process control, manufacturing, avionics and the automotive ... -
Growth of NGVs and comparative study of cylinder material for CNG storage
(Springer, 2023)In the present paper, the growth of Natural Gas Vehicles (NGVs) and the various pressure vessels used for storing compressed natural gas (CNG) is discussed.Also, the comparison of Von-mises stress in pressure vessels (PVs) ... -
Handbook of thermal science and engineering
This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, ... -
HandMECH—Mechanical hand prosthesis: Conceptual design of a two degrees-of-freedom compliant wrist
(Springer, 2022)A compliant wrist joint is important for positioning the hand in different positions to perform various daily tasks. It is also important that the wrist is able to achieve sufficient range of motion (RoM). The RoM is ... -
HandMECH—Mechanical hand prosthesis: Conceptual design of the hand compartment
(Springer, 2022)In this study, conceptual design of the hand compartment of a body-powered hand prosthesis, HandMECH, is presented. HandMECH is a body-powered prosthesis and the hand compartment is designed according to human finger size ... -
Hardness and wear resistance of roller burnished 316L stainless steel
(Elsevier, 2021)This study investigates the effects of roller burnishing on the microstructure, surface microhardness, and wear resistance of 316L stainless steel. Experimental design based on the Taguchi orthogonal array was employed to ... -
Heart motion prediction based on adaptive estimation algorithms for robotic assisted beating heart surgery
(IEEE, 2013)Robotic-assisted beating heart surgery aims to allow surgeons to operate on a beating heart without stabilizers as if the heart is stationary. The robot actively cancels heart motion by closely following a point of interest ... -
Heat transfer characteristics of impinging steady and synthetic jets over vertical flat surface
(Elsevier, 2015-01)In this paper, heat transfer characteristics of single-slot impinging steady and synthetic jets on a 25.4-mm × 25.4-mm vertical surface were experimentally investigated. The experiments were conducted with a fixed nozzle ... -
Heat transfer enhancement with actuation of magnetic nanoparticles suspended in a base fluid
(AIP, 2012)In this study, we have experimentally demonstrated that heat transfer can be substantially increased by actuating magnetic nanoparticles inside a nanofluid. In order to materialize this, we have utilized a miniature heat ... -
Hierarchical reliability assessment models for novel LED-based recessed down lighting systems
(Springer Science+Business Media, 2012)This chapter describes development of hierarchical reliability assessment models for novel LED-based lighting systems. Much of the chapter is excerpted from references (Arik et al., IEEE Trans Compon Packag Tech 33:668–679, ... -
High brightness illumination based on laser light diffusion with mie scattering
(ASME, 2022)Limited luminous flux per wafer area of light emitting diodes (LEDs) for high power solid state illumination causes some packaging real estate issues. This problem can be tackled with laser diodes (LDs). At high current ... -
High power series elastic actuator development for torque-controlled exoskeletons
(Springer Nature, 2019)This paper presents the development procedures of a high power series elastic actuator that can be used in torque-controlled exoskeleton applications as a high-fidelity torque source. In order to provide a high torque ... -
High temperature characteristics of Al2024/SiC metal matrix composite fabricated by friction stir processing
(Elsevier, 2018-07-25)In the present study, friction stir processing (FSP) is used for the synthesis of an aluminum metal matrix composite (MMC) reinforced by SiC particles. MMC specimens with reinforced microstructures exhibited significant ... -
High temperature deformation behavior of 4340 steel: activation energy calculation and modeling of flow
(Elsevier, 2013-12)The 4340 steel is extensively utilized in several industries including automotive and aerospace for manufacturing a large number of structural components. Due to the importance of thermo-mechanical processing in the ... -
High temperature flow response modeling of ultra-fine grained titanium
(MDPI AG, 2015)This work presents the mechanical behavior modeling of commercial purity titanium subjected to severe plastic deformation (SPD) during post-SPD compression, at temperatures of 600-900 °C and at strain rates of 0.001-0.1 ... -
High-speed visualization of acoustically excited cavitation bubbles in a cluster near a rigid boundary
(Springer Berlin Heidelberg, 2017)In the present work, high-speed visualizations at one million frames/s have been used to study the oscillation characteristics of acoustic cavitation bubbles. The bubbles are generated by acoustic cavitation using an ... -
A high-torque density compliant actuator design for physical robot environment interaction
(IEEE, 2020)Compared to the traditional industrial robots that use rigid actuators, the advanced robotic systems are mobile and physically interact with unknown and dynamic environments. Therefore, they need intrinsically safe and ... -
Hot deformation behavior of ultra-fine grained pure Ti
(Trans Tech Publications, 2013-11)In the present study, compression tests were performed at a strain rate of 0.001 to 0.1 s(-1) and in the range of 600 degrees C to 900 degrees C to investigate the high temperature deformation behavior and flow stress model ... -
Identification and evaluation of cracks in electrostatically actuated resonant gas sensors using Harris Hawk / Nelder Mead and perturbation methods
(Techno-Press, 2021-01)In this paper we study the static deflection, natural frequency, primary resonance of an electrostatically actuated cracked gas sensor. Besides, a novel hybrid metaheuristic algorithm is proposed to detect the location and ...
Share this page
