Search
Now showing items 1-7 of 7
Optik iletişim sistemlerinde standart CMOS fotodiyotların uygulaması
(IEEE, 2017)
Bu bildiride standart CMOS üretim süreçleri ile gerçeklenmiş, mikroelektronik sistemlere düşük maliyetlerle tümleştirilebilecek fotodiyot yapılarının optik haberleşme sistemlerine uygulanabilirliği incelenmiştir. Silikon ...
Experimental validation of a novel RLL code for visible light communication
(IEEE, 2020)
Flicker arising in visible light communication (VLC) system is typically mitigated by run-length-limited (RLL) codes. The IEEE 802.15.7 standard proposes RLL codes according to the modulation type and data rate. In this ...
Distance and power based experimental verification of channel model in visible light communication
(IEEE, 2019)
In this work, a channel model for line-of-sight (LOS) in visible light communication is elaborated. In the proposed channel model, there is no optical component, such as filter or lens, between the transmitting LED and the ...
A new LED response model and its application to pre-equalization in VLC systems
(IEEE, 2021-09-01)
With the growing interest in visible light communication (VLC), it is desired to transmit data at very high rates despite the LED's bandwidth becoming a bottleneck. The bandwidth of a white LED usually ranges between ...
Characterization of LEDs for visible-light communications
(SPIE, 2021-02)
Recent advances in solid-state technologies have enabled the development of light-emitting diodes (LEDs) with favorable features such as long life expectancy, low-power consumption, and reduced heat dissipation. Visible-light ...
A 130 nm CMOS receiver for visible light communication
(IEEE, 2022-06-15)
Visible light communication (VLC) is an emerging technology that has been gaining attention over the last few years. Transmission of data at higher rates in a VLC system is mainly limited by the modulation bandwidth of the ...
Opto-electronic receiver system with post-equalization for visible light communications
(IEEE, 2020-10-05)
In this work, A significant increase in the data rate is achieved by designing an opto-electronic receiver for the visible light communication system. LEDs used at the transmitter side in the visible light communication ...
Share this page