Conduction-driven cooling of LED-based automotive LED lighting systems for abating local hot spots
dc.contributor.author | Saati, F. | |
dc.contributor.author | Arık, Mehmet | |
dc.date.accessioned | 2018-09-18T13:32:12Z | |
dc.date.available | 2018-09-18T13:32:12Z | |
dc.date.issued | 2018-02 | |
dc.identifier.issn | 0091-3286 | en_US |
dc.identifier.uri | http://hdl.handle.net/10679/5961 | |
dc.identifier.uri | https://www.spiedigitallibrary.org/journals/optical-engineering/volume-57/issue-02/025102/Conduction-driven-cooling-of-LED-based-automotive-LED-lighting-systems/10.1117/1.OE.57.2.025102.full?SSO=1 | |
dc.description.abstract | Light-emitting diode (LED)-based automotive lighting systems pose unique challenges, such as dual-side packaging (front side for LEDs and back side for driver electronics circuit), size, harsh ambient, and cooling. Packaging for automotive lighting applications combining the advanced printed circuit board (PCB) technology with a multifunctional LED-based board is investigated with a focus on the effect of thermal conduction-based cooling for hot spot abatement. A baseline study with a flame retardant 4 technology, commonly known as FR4 PCB, is first compared with a metal-core PCB technology, both experimentally and computationally. The double-sided advanced PCB that houses both electronics and LEDs is then investigated computationally and experimentally compared with the baseline FR4 PCB. Computational models are first developed with a commercial computational fluid dynamics software and are followed by an advanced PCB technology based on embedded heat pipes, which is computationally and experimentally studied. Then, attention is turned to studying different heat pipe orientations and heat pipe placements on the board. Results show that conventional FR4-based light engines experience local hot spots (ΔT>50°C) while advanced PCB technology based on heat pipes and thermal spreaders eliminates these local hot spots (ΔT<10°C), leading to a higher lumen extraction with improved reliability. Finally, possible design options are presented with embedded heat pipe structures that further improve the PCB performance. | en_US |
dc.description.sponsorship | Turkish Ministry of Science, Industry and Technology ; FARBA Corporation ; Ozyegin University | |
dc.language.iso | eng | en_US |
dc.publisher | SPIE | en_US |
dc.relation.ispartof | Optical Engineering | |
dc.rights | openAccess | |
dc.title | Conduction-driven cooling of LED-based automotive LED lighting systems for abating local hot spots | en_US |
dc.type | Article | en_US |
dc.description.version | Publisher version | |
dc.peerreviewed | yes | en_US |
dc.publicationstatus | Published | en_US |
dc.contributor.department | Özyeğin University | |
dc.contributor.authorID | (ORCID 0000-0002-9505-281X & YÖK ID 124782) Arık, Mehmet | |
dc.contributor.ozuauthor | Arık, Mehmet | |
dc.identifier.volume | 57 | en_US |
dc.identifier.issue | 2 | en_US |
dc.identifier.wos | WOS:000427030700031 | |
dc.identifier.doi | 10.1117/1.OE.57.2.025102 | en_US |
dc.subject.keywords | Automotive lighting | en_US |
dc.subject.keywords | Light-emitting diode | en_US |
dc.subject.keywords | Local hot spots | en_US |
dc.subject.keywords | Double-sided printed circuit board | en_US |
dc.subject.keywords | Thermal resistance | en_US |
dc.identifier.scopus | SCOPUS:2-s2.0-85042222620 | |
dc.contributor.authorMale | 1 | |
dc.relation.publicationcategory | Article - International Refereed Journal - Institutional Academic Staff |
Files in this item
This item appears in the following Collection(s)
Share this page