Browsing Mechanical Engineering by Title
Now showing items 162-181 of 372
-
Handbook of thermal science and engineering
This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, ... -
Hardness and wear resistance of roller burnished 316L stainless steel
(Elsevier, 2021)This study investigates the effects of roller burnishing on the microstructure, surface microhardness, and wear resistance of 316L stainless steel. Experimental design based on the Taguchi orthogonal array was employed to ... -
Heart motion prediction based on adaptive estimation algorithms for robotic assisted beating heart surgery
(IEEE, 2013)Robotic-assisted beating heart surgery aims to allow surgeons to operate on a beating heart without stabilizers as if the heart is stationary. The robot actively cancels heart motion by closely following a point of interest ... -
Heat transfer characteristics of impinging steady and synthetic jets over vertical flat surface
(Elsevier, 2015-01)In this paper, heat transfer characteristics of single-slot impinging steady and synthetic jets on a 25.4-mm × 25.4-mm vertical surface were experimentally investigated. The experiments were conducted with a fixed nozzle ... -
Heat transfer enhancement with actuation of magnetic nanoparticles suspended in a base fluid
(AIP, 2012)In this study, we have experimentally demonstrated that heat transfer can be substantially increased by actuating magnetic nanoparticles inside a nanofluid. In order to materialize this, we have utilized a miniature heat ... -
Hierarchical reliability assessment models for novel LED-based recessed down lighting systems
(Springer Science+Business Media, 2012)This chapter describes development of hierarchical reliability assessment models for novel LED-based lighting systems. Much of the chapter is excerpted from references (Arik et al., IEEE Trans Compon Packag Tech 33:668–679, ... -
High power series elastic actuator development for torque-controlled exoskeletons
(Springer Nature, 2019)This paper presents the development procedures of a high power series elastic actuator that can be used in torque-controlled exoskeleton applications as a high-fidelity torque source. In order to provide a high torque ... -
High temperature characteristics of Al2024/SiC metal matrix composite fabricated by friction stir processing
(Elsevier, 2018-07-25)In the present study, friction stir processing (FSP) is used for the synthesis of an aluminum metal matrix composite (MMC) reinforced by SiC particles. MMC specimens with reinforced microstructures exhibited significant ... -
High temperature deformation behavior of 4340 steel: activation energy calculation and modeling of flow
(Elsevier, 2013-12)The 4340 steel is extensively utilized in several industries including automotive and aerospace for manufacturing a large number of structural components. Due to the importance of thermo-mechanical processing in the ... -
High temperature flow response modeling of ultra-fine grained titanium
(MDPI AG, 2015)This work presents the mechanical behavior modeling of commercial purity titanium subjected to severe plastic deformation (SPD) during post-SPD compression, at temperatures of 600-900 °C and at strain rates of 0.001-0.1 ... -
High-speed visualization of acoustically excited cavitation bubbles in a cluster near a rigid boundary
(Springer Berlin Heidelberg, 2017)In the present work, high-speed visualizations at one million frames/s have been used to study the oscillation characteristics of acoustic cavitation bubbles. The bubbles are generated by acoustic cavitation using an ... -
Hot deformation behavior of ultra-fine grained pure Ti
(Trans Tech Publications, 2013-11)In the present study, compression tests were performed at a strain rate of 0.001 to 0.1 s(-1) and in the range of 600 degrees C to 900 degrees C to investigate the high temperature deformation behavior and flow stress model ... -
Identification and evaluation of cracks in electrostatically actuated resonant gas sensors using Harris Hawk / Nelder Mead and perturbation methods
(Techno-Press, 2021-01)In this paper we study the static deflection, natural frequency, primary resonance of an electrostatically actuated cracked gas sensor. Besides, a novel hybrid metaheuristic algorithm is proposed to detect the location and ... -
Image registration method for mobile-device-based multispectral optical diagnostics for buildings
(The Optical Society, 2019-09-10)The recent advances in mobile device hardware and software introduced new opportunities to perform more advanced computation and measurements for buildings. Multispectral optical imaging is a widely recognized technique ... -
Impact of electronics over localized hot spots in multi-chip white LED light engines
(IEEE, 2019)In recent years, demand towards high power white LEDs has risen significantly covering a wide range of application areas. While many industries prefer more light extraction using less number of LED chips on their luminaires, ... -
Impact of functional nanofluid coolant on radiator performance
(ASME, 2019-08)While a number of liquids are preferred in many heating and cooling applications, their thermal capacity can be a limiting factor in many thermal systems. Therefore, a series of methods such as use of mixtures of two or ... -
Impact of junction temperature over forward voltage drop for red, blue and green high power light emitting diode chips
(IEEE, 2017)Commercially available light emitting diodes (LEDs) that have high efficiencies and long lifetime are offered in advanced packaging technologies. Many cooling systems were developed for current LED systems that enable a ... -
Impact of orifice location on the mechanical response of side and central orifice synthetic jets
(2018-07-24)Synthetic jets have been at the focus of a number applications including flow control and thermal management of microelectronics due to their unique characteristics of transferring linear momentum through a flow structure ... -
Impact of orifice size over mechanical, flow and thermal performances of synthetic jets
(IEEE, 2018-07-24)Recent electronic systems require more aggressive cooling solutions due to their high functionality, densely packaged components and localized heating compared to low functionality systems in the last decade. Synthetic ... -
Impact of pad conditioning on thickness profile control in chemical mechanical planarization
(Springer Science+Business Media, 2013-01)Chemical mechanical planarization (CMP) has been proven to be the best method to achieve within-wafer and within-die uniformity for multilevel metallization. Decreasing device dimensions and increasing wafer sizes continuously ...
Share this page