Browsing Mechanical Engineering by Title
Now showing items 190-209 of 430
-
Gabor filter based localization of needles in ultrasound guided robotic interventions
(IEEE, 2014)This paper presents an entropy based parameter tuning method for needle segmentation, and a probability map based needle tip estimation method using Gabor-based line filter. The proposed automatic parameter tuning method ... -
Gabor filter-based localization of straight and curved needles in 2D ultrasound images
(TÜBİTAK, 2020)2D ultrasound (US) is one of the most commonly used medical imaging devices for needle localization in biopsies. However, the produced images are low-resolution and contain an excessive number of artifacts, which makes the ... -
Geometric design of micro scale volumetric receiver using system-level inputs: An application of surrogate-based approach
(Elsevier, 2023-09-15)Concentrating solar thermal power is an emerging renewable technology with accessible storage options to generate electricity when required. Central receiver systems or solar towers have the highest commercial potential ... -
Global existence and blow-up of solutions for a general class of doubly dispersive nonlocal nonlinear wave equations
(Elsevier, 2013-01)This study deals with the analysis of the Cauchy problem of a general class of nonlocal nonlinear equations modeling the bi-directional propagation of dispersive waves in various contexts. The nonlocal nature of the problem ... -
Graphene as a piezoresistive material in strain sensing applications
(MDPI, 2022-01-12)High accuracy measurement of mechanical strain is critical and broadly practiced in several application areas including structural health monitoring, industrial process control, manufacturing, avionics and the automotive ... -
Handbook of thermal science and engineering
This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, ... -
HandMECH—Mechanical hand prosthesis: Conceptual design of a two degrees-of-freedom compliant wrist
(Springer, 2022)A compliant wrist joint is important for positioning the hand in different positions to perform various daily tasks. It is also important that the wrist is able to achieve sufficient range of motion (RoM). The RoM is ... -
HandMECH—Mechanical hand prosthesis: Conceptual design of the hand compartment
(Springer, 2022)In this study, conceptual design of the hand compartment of a body-powered hand prosthesis, HandMECH, is presented. HandMECH is a body-powered prosthesis and the hand compartment is designed according to human finger size ... -
Hardness and wear resistance of roller burnished 316L stainless steel
(Elsevier, 2021)This study investigates the effects of roller burnishing on the microstructure, surface microhardness, and wear resistance of 316L stainless steel. Experimental design based on the Taguchi orthogonal array was employed to ... -
Heart motion prediction based on adaptive estimation algorithms for robotic assisted beating heart surgery
(IEEE, 2013)Robotic-assisted beating heart surgery aims to allow surgeons to operate on a beating heart without stabilizers as if the heart is stationary. The robot actively cancels heart motion by closely following a point of interest ... -
Heat transfer characteristics of impinging steady and synthetic jets over vertical flat surface
(Elsevier, 2015-01)In this paper, heat transfer characteristics of single-slot impinging steady and synthetic jets on a 25.4-mm × 25.4-mm vertical surface were experimentally investigated. The experiments were conducted with a fixed nozzle ... -
Heat transfer enhancement with actuation of magnetic nanoparticles suspended in a base fluid
(AIP, 2012)In this study, we have experimentally demonstrated that heat transfer can be substantially increased by actuating magnetic nanoparticles inside a nanofluid. In order to materialize this, we have utilized a miniature heat ... -
Hierarchical reliability assessment models for novel LED-based recessed down lighting systems
(Springer Science+Business Media, 2012)This chapter describes development of hierarchical reliability assessment models for novel LED-based lighting systems. Much of the chapter is excerpted from references (Arik et al., IEEE Trans Compon Packag Tech 33:668–679, ... -
High brightness illumination based on laser light diffusion with mie scattering
(ASME, 2022)Limited luminous flux per wafer area of light emitting diodes (LEDs) for high power solid state illumination causes some packaging real estate issues. This problem can be tackled with laser diodes (LDs). At high current ... -
High power series elastic actuator development for torque-controlled exoskeletons
(Springer Nature, 2019)This paper presents the development procedures of a high power series elastic actuator that can be used in torque-controlled exoskeleton applications as a high-fidelity torque source. In order to provide a high torque ... -
High temperature characteristics of Al2024/SiC metal matrix composite fabricated by friction stir processing
(Elsevier, 2018-07-25)In the present study, friction stir processing (FSP) is used for the synthesis of an aluminum metal matrix composite (MMC) reinforced by SiC particles. MMC specimens with reinforced microstructures exhibited significant ... -
High temperature deformation behavior of 4340 steel: activation energy calculation and modeling of flow
(Elsevier, 2013-12)The 4340 steel is extensively utilized in several industries including automotive and aerospace for manufacturing a large number of structural components. Due to the importance of thermo-mechanical processing in the ... -
High temperature flow response modeling of ultra-fine grained titanium
(MDPI AG, 2015)This work presents the mechanical behavior modeling of commercial purity titanium subjected to severe plastic deformation (SPD) during post-SPD compression, at temperatures of 600-900 °C and at strain rates of 0.001-0.1 ... -
High-speed visualization of acoustically excited cavitation bubbles in a cluster near a rigid boundary
(Springer Berlin Heidelberg, 2017)In the present work, high-speed visualizations at one million frames/s have been used to study the oscillation characteristics of acoustic cavitation bubbles. The bubbles are generated by acoustic cavitation using an ... -
Hot deformation behavior of ultra-fine grained pure Ti
(Trans Tech Publications, 2013-11)In the present study, compression tests were performed at a strain rate of 0.001 to 0.1 s(-1) and in the range of 600 degrees C to 900 degrees C to investigate the high temperature deformation behavior and flow stress model ...
Share this page
