Browsing Faculty of Engineering by Author "(ORCID 0000-0001-5692-4809 & YÖK ID 163236) Yapıcı, Güven"
Now showing items 1-20 of 41
-
Application of a novel friction stir spot welding process on dissimilar aluminum joints
Bajilane, Isam Jabbar Ibrahim; Yapıcı, Güney Güven (Elsevier, 2018-10)Intermediate layer friction stir spot welding (IL-FSSW) is introduced in this study as a novel spot welding technique to eliminate the keyhole associated with the conventional friction stir spot welding (FSSW). This process ... -
Application of novel constrained groove pressing routes on austenitic stainless steel
Özdemir, Zeynep Güler; Yapıcı, Güney Güven (Springer, 2021-11)In this study, a novel set of constrained groove processing routes was put forward especially to underline the variation of strain paths. Namely, 304 stainless steel sheets were processed by five distinctly specified ... -
Cyclic deformation response of ultra-fine grained titanium at elevated temperatures
Sajadifar, Seyed Vahid; Yapıcı, Güney Güven; Demler, E.; Krooss, P.; Wegener, T.; Maier, H. J.; Niendorf, T. (Elsevier, 2019-05)This study focuses on the high-temperature cyclic deformation response (CDR) of ultra-fine grained (UFG) titanium of commercial purity (grade 4) processed via equal channel angular extrusion as a severe plastic deformation ... -
Development of an antagonistically actuated smart joint
Vahidyeganeh, Ali; Şimsek, Görkem Muttalip; Jabeen, Saher; Bebek, Özkan; Yapıcı, Güney Güven (Trans Tech Publications, 2017)Shape memory alloys with their phase transformation properties; have been broadly implemented in smart structures. In this study, a functional design is presented where two wires actuate antagonistically to achieve motion ... -
Discrete-time integral sliding mode control of a smart joint for minimally invasive surgeries
Jabeen, Saher; Yeganeh, Ali Vahid; Şimsek, Görkem Muttalip; Yapıcı, Güney Güven; Abidi, K.; Bebek, Özkan (IEEE, 2016)In this work, a shape memory alloy(SMA) actuator based joint (smart joint) is controlled using a discrete-time integral sliding mode (DISM) control to guide the motion of an active catheter. Controller is designed on the ... -
Effect of aging on the mechanical behavior of aluminum-steel composites processed by accumulative roll bonding
Tahir, Furqan; Yapıcı, Güney Güven (Elsevier, 2021)Severe plastic deformation (SPD) processes have been widely used to provide ultrafine-grained (UFG) structures along with enriched strength in various metals. This study focuses on accumulative roll bonding (ARB), an SPD ... -
Effect of coating method on the surface characteristics of niti shape memory alloy
Şimşek, Görkem Muttalip; İpekoğlu, M.; Yapıcı, Güney Güven (Trans Tech Publications Ltd, 2020)Metallic materials including stainless steel, cobalt-chromium alloys, titanium and its alloys, and nickel-titanium (NiTi) shape memory alloys have been used in biomedical applications since the 1940s due to their favorable ... -
Effect of commercial purity levels on the mechanical properties of ultrafine-grained titanium
Purcek, G.; Yapıcı, Güney Güven; Karaman, I.; Maier, H. J. (Elsevier, 2011-03-15)Two grades of commercial purity (CP) titanium (grades 2 and 4) were processed using equal-channel angular extrusion (ECAE) at 300 ◦C and 450 ◦C, respectively. The processing temperatures were the minimum temperatures at ... -
Effect of external stress on the post-aging mechanical properties of rolled magnesium alloys
Mısırlı, Mustafa; Ghobadlou, Alı Hosseınzadeh; Yapıcı, Güney Güven (TANGER Ltd., 2020)In the current study the effects of conventional aging and stress aging on the microstructure and mechanical behavior of warm rolled AZ31 magnesium alloy were investigated. Tensile experiments revealed that the ultimate ... -
Effect of grain size on the very high cycle fatigue behavior and notch sensitivity of titanium
Sajadifar, Seyed Vahid; Wegener, T.; Yapıcı, Güney Güven; Niendorf, T. (Elsevier, 2019-12)The very high-cycle fatigue performances of coarse-grained and ultrafine-grained titanium samples with different geometries at ambient temperature and various stress amplitudes were investigated. Severe plastic deformation ... -
Effect of heat treatment on the corrosion-fatigue of NiTi shape memory alloy
Şimşek, Görkem Muttalip; Sayınbaş, Yiğit Kaan; Uysal, Miray; Yapıcı, Güney Güven (American Institute of Physics Inc., 2019)Nickel Titanium (NiTi) shape memory alloys have been considered convenient implant material due to their distinguished properties including superelasticity (SE), shape memory effect (SME) and biocompatibility. Among these ... -
Effect of layer architecture on the mechanical behavior of accumulative roll bonded interstitial free steel/aluminum composites
Aljashaami, Dhyai Hassan Jawad; Ghobadlou, Ali Hosseinzadeh; Yapıcı, Güney Güven (Elsevier, 2021-06-22)Multi-layered interstitial free (IF) steel/aluminum (Al) composites were fabricated by the accumulative roll bonding (ARB) method. Two types of IF steel/Al6061 dissimilar layered metal composites (LMC) with varied stacking ... -
Effect of processing parameters on the strength of keyhole free friction stir spot aluminum welds
Bajilane, Isam Jabbar Ibrahim; Yapıcı, Güney Güven (American Institute of Physics Inc., 2019)Intermediate layer friction stir spot welding (IL-FSSW) is a new solid-state welding method appropriate for making spot joints, particularly in light-weight materials, especially notable on account of the weight saving ... -
Effect of purity levels on the high-temperature deformation characteristics of severely deformed titanium
Sajadifar, Seyed Vahid; Yapıcı, Güney Güven (Springer International Publishing, 2017)In the present investigation, high-temperature compression tests were conducted at strain rates of 0.001 to 0.1 s−1 and at temperatures of 873 K to 1173 K (600 °C to 900 °C) in order to study the hot deformation characteristics ... -
Effect of severe plastic deformation on the damping behavior of titanium
Sajadifar, Seyed Vahid; Atli, C.; Yapıcı, Güney Güven (Elsevier, 2019-06-01)In this work, influence of severe plastic deformation on the damping properties of commercial purity titanium is explored. Deformation induced grain refinement improved the strength at room temperature while this effect ... -
Elevated temperature mechanical behavior of severely deformed titanium
Sajadifar, Seyed Vahid; Yapıcı, Güney Güven (Springer Nature, 2014-05)In this investigation, compression tests were performed at a strain rate of 0.001-0.1 s(-1) in the range of 600-900 degrees C to study the high temperature deformation behavior and flow stress model of commercial purity ... -
Evaluating the mechanical behavior of ARB processed aluminum composites using shear punch testing
Aljashaami, Dhyai Hassan Jawad; Ghobadlou, Ali Hosseinzadeh; Mısırlı, Mustafa; Yapıcı, Güney Güven (Trans Tech Publications Ltd, 2020)Multi-layered metal composites have received considerable attention due to their improved mechanical and physical properties. In this study, Al6061/Al2024 composite was processed by accumulative roll bonding (ARB) as a ... -
Evaluation of NaOH pre-treatment on the corrosion behavior and surface characteristics of hydroxyapatite coated NiTi alloy
Şimşek, Görkem Muttalip; Ipekoglu, M.; Yapıcı, Güney Güven (Springer Nature, 2020-08-02)Successful short-term implementation of nickel-titanium (NiTi) alloys as implants has been a motivation for the development of long-term applications. However, rendering these as safe implant materials is challenging. The ... -
Fatigue behavior of friction stir welded joints of pure copper with ultra-fine grains
Salahi, Salar; Yapıcı, Güney Güven (Elsevier, 2015)In order to determine the long term durability of friction stir welded joints with ultra-fine grained microstructure, investigation of the mechanical response with specific emphasis on fatigue behaviour is critical. In ... -
Fatigue characteristics of continuous welded rails and the effect of residual stress on fatigue-ratchetting interaction
Mansouri, Deniz; Şendur, Polat; Yapıcı, Güney Güven (Taylor & Francis, 2020-03-16)The importance of ratchetting-fatigue interaction is garnering interest due to complex failure mechanism of rail welds under cyclic loading. The objective of this paper is to investigate the fatigue characteristics of ...
Share this page