Design and implementation of a quad element patch antenna at 5.8 GHz

View/ Open
Type :
Article
Publication Status :
Published
Access :
openAccess
Abstract
This paper presents simulation and experimental verification of a quad microstrip patch antenna that operates at 5.8 GHz. Sonnet antenna design software was used to simulate the performance of the antenna. To reduce the design's complexity and the computational load, the antenna and the feeding lines were simulated separately. An optimization was done for each subpart to get the optimum desired results. Finally, all the subparts were merged and the final structure was simulated to check the performance. A prototype of the antenna was fabricated on a double-sided PCB substrate (relative permittivity=10.2, thickness=1.28 mm) using a PCB milling machine. The S11 of -14 dB and -18.8 dB and maximum gain of 6.2 dB and 4.2 dB were obtained, from the simulation and experimental measurements, respectively.
Source :
Applied Computational Electromagnetics Society Journal
Date :
2018-10
Volume :
33
Issue :
10
Publisher :
The Applied Computational Electromagnetics Society
Collections
Share this page