Show simple item record

dc.contributor.authorSalahi, Salar
dc.date.accessioned2018-07-25T08:44:33Z
dc.date.available2018-07-25T08:44:33Z
dc.date.issued2017-08
dc.identifier.urihttp://hdl.handle.net/10679/5857
dc.identifier.urihttps://tez.yok.gov.tr
dc.identifier.urihttp://discover.ozyegin.edu.tr/iii/encore/record/C__Rb2123264?lang=eng
dc.descriptionThesis (M.A.)--Özyeğin University, Graduate School of Sciences and Engineering, Department of Mechanical Engineering, August 2017.
dc.description.abstractDue to its low weight and good combination of mechanical strength and formability, wrought magnesium alloys containing zinc and zirconium are widely used in automotive and aerospace industries. Since mechanical properties of pure magnesium are weak, the addition of alloying elements is used to improve the mechanical response of magnesium alloys. In this study, ZK60 wrought alloy was selected to improve its mechanical properties using thermo-mechanical processes. A systematic combination of heat treatment and warm rolling was applied for this purpose. The solution treated sample was exposed to rolling followed by annealing treatment for enhancing the formability. Static and under stress regimes of aging were performed to form fine precipitates in the Mg matrix. The low temperature tensile behavior of samples was investigated at temperatures of -60℃, -20℃ and ambient temperature at a quasi-static strain rate of 10-3 s-1. The effect of processing parameters including heat treatment, deformation and aging on the microstructure, texture and mechanical behavior of samples were characterized as well. It was shown that systematic thermo-mechanical processes can significantly refine the microstructure and enhance the mechanical properties of static and stress aged samples. The fine grained structure along with equiaxed and uniform grains were achieved for the stress aged samples, while bimodal structure with coarse grains was observed for the solution treated sample. It was shown that rolling and stress aging can form strong basal texture aligned with the normal direction. It was also observed that in solution treated sample few number of coarse precipitates were formed, while high density of fine precipitates was observed for the static aged sample. The stress aged sample possessed higher density of precipitates relative to the solution treated and static aged samples. The results obtained from the tensile tests proved that the mechanical properties of both static and stress aged samples were higher than that of the solution treated sample. While the tensile strength and elongation to failure of solution treated sample was 255 MPa and 11.2% respectively, the tensile response for best condition of static aged sample was improved up to 304 MPa and 25%. The rolling and stress aging processes under the load of 50 MPa for 3 hours improved the tensile strength of samples up to 353 MPa and ductility up to 12.5%. At -60℃, the mechanical response of solution treated sample is limited to strength of 262 MPa and ductility of 2.6%. The mechanical properties of stress aged sample are significantly improved at the same temperature up to strength of 338 MPa and ductility of 9.2%.en_US
dc.description.abstractÇinko ve zirkonyum içeren işlenik magnezyum alaşımları düşük ağırlığı ve mukavemet-şekillendirilebilirlik kombinasyonu sayesinde otomotiv ve havacılık endüstrisinde yaygın olarak kullanılmaktadır. Saf magnezyumun mekanik özelliklerinin zayıf olmasından dolayı bu özelliklerin ilerletilmesi için ek alaşımlama elementleri kullanılmaktadır. Bu çalışmada ZK60 işlenik alaşımı, mekanik özellikleri termo-mekanik işleme ile geliştirilmek üzere seçilmiştir. Bu amaçla ısıl işlem ve ılık haddelemenin sistematik bir kombinasyonu uygulanmıştır. Çözeltiye alınmış numune haddelemeye tabi tutulmuştur. Şekillendirilebilirliği artırmak amacıyla tavlama işleminden sonra magnezyum matrisinde ince çökeltiler oluşturmak için yüksüz ve yük altında yaşlandırma işlemi yapılmıştır. Numunelerin düşük sıcaklıktaki çekme davranışı -60℃, -20℃ ve ortam sıcaklığında ve 10-3 s-1 kuvazi-statik gerinim hızında gözlenmiştir. Isıl işlem, deformasyon ve yaşlandırma da dahil olmak üzere işleme parametrelerinin etkisinin numunelerin mikroyapı, doku ve mekanik davranışı üzerindeki etkisi de karakterize edilmiştir. Sistematik termo-mekanik işlemenin mikroyapıyı önemli derecede inceltebildiği, yüksüz ve yük altında yaşlandırılmış numunelerin mekanik özelliklerini arttırdığı gözlenmiştir. Yük altında yaşlandırılmış numuneler için eş eksenli ve düzgün taneli ince yapılı yapı elde edilirken, çözeltiye alınmış numuneler için iri taneli bimodal yapı gözlenmiştir. Haddeleme ve yaşlandırma işleminin normal yön ile hizalı, güçlü bazal doku oluşumuna önemli ölçüde yol açtığı gösterilmiştir. Çözeltiye alınmış numunede az sayıda iri çökelti oluştuğu ve yüksüz yaşlandırılmış numunede yüksek yoğunluklu ince çökelti oluştuğu gözlenmektedir. Yük altında yaşlandırılmış numune, çözeltiye alınmış ve yüksüz yaşlandırılmış numunelere göre daha yüksek çökelti yoğunluğuna sahiptir. Çekme testlerinden elde edilen sonuçlar, yüksüz ve yük altında yaşlandırılmış numunelerin mekanik özelliklerinin çözeltiye alınmış numunelerden daha yüksek olduğunu ortaya koymaktadır. Çözeltiye alınmış numunenin çekme dayanımı ve kopmaya kadar uzaması sırasıyla 225 MPa ve %11.2 iken, yüksüz yaşlandırılmış numunenin en iyi durumundaki çekme dayanımı ve uzaması 304 MPa ve %25'e kadar yükseltilmiştir. 3 saat süreyle 50 MPa yük altında yapılan hadde ve yük altında yaşlandırma işlemleri, numunelerin çekme mukavemetini 353 MPa'ya kadar artırmıştır. -60℃'de çözeltiye alınmış numune 262 MPa dayanımın yanı sıra %2.6 süneklik göstermiştir. Aynı sıcaklıkta, yük altında yaşlandırma sonrası mekanik özellikler önemli şekilde ilerletilmiş olup, 338 MPa ve %9.2 seviyesi elde edilmiştir.
dc.language.isoengen_US
dc.rightsrestrictedAccess
dc.titleLow temperature behavior of ZK60 magnesium alloy after thermo-mechanical processingen_US
dc.title.alternativeZK60 magnezyum alaşımının termo-mekanik işleme sonrası düşük sıcaklık davranışı
dc.typeMaster's thesisen_US
dc.contributor.advisorYapıcı, Güney Güven
dc.contributor.committeeMemberYapıcı, Güney Güven
dc.contributor.committeeMemberBundur, Zeynep Başaran
dc.contributor.committeeMemberİpekoğlu, M.
dc.publicationstatusUnpublisheden_US
dc.contributor.departmentÖzyeğin University
dc.subject.keywordsMechanical Engineeringen_US
dc.contributor.ozugradstudentSalahi, Salar
dc.contributor.authorMale1
dc.relation.publicationcategoryThesis - Institutional Graduate Student


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

  • Master's Theses
    This Collection covers master's thesis produced at Özyeğin University

Show simple item record


Share this page