Browsing Civil Engineering by Author "Özyeğin University"
Now showing items 1-20 of 127
-
2D non-linear seismic response of the Dinar basin,TURKEY
Khanbabazadeh, H.; Iyisan, R.; Ansal, Mustafa Atilla; Hasal, M. E. (Elsevier, 2016-10)Local geological conditions generate significant amplification of ground motion and concentrated damage during earthquakes. The highly concentrated damages at the edges of the Dinar basin during occurred earthquakes at ... -
Analysis of offshore wind turbine by considering soil-pile-structure interaction: effects of foundation and sea-wave properties
Fard, Maryam Massah; Erken, A.; Erkmen, Bülent; Ansal, Mustafa Atilla (Taylor & Francis, 2022)Prediction of the dynamic performance of an offshore wind turbine (OWT) requires consideration of many different design parameters. Besides the superstructure, the OWT foundation also plays an important role both functionally ... -
Analysis of the benefits, challenges and risks for the integrated use of BIM, RFID and WSN: A mixed method research
Seyis, Senem; Sönmez, A. M. (Emerald Publishing Limited, 2023-07-11)Purpose: The purpose of this study is to identify, classify and prioritize the benefits, challenges and risks for the integrated use of building information modeling (BIM), radio frequency identification (RFID) and wireless ... -
Analyzing the benefits and challenges of building information modelling and life cycle assessment integration
Azizoğlu, B.; Seyis, Senem (IEEE, 2020)Previous studies show that the architecture, engineering and construction (AEC) industry contributes up to 1/3 of global GHG emissions. With the aim of mitigating negative impacts of AEC industry on the natural environment, ... -
Assembly-based flood repair cost and time models for industrial buildings in Turkey
Ölmez, Hasan Numan; Deniz, Derya (Elsevier, 2023-10)Flooding is one of the most frequent hazard events significantly affecting the industry in Turkey, leading to severe economic losses and business disruptions. To predict the direct flood losses and business downtimes on ... -
Automated flow rate control of extrusion for 3D concrete printing incorporating rheological parameters
Ahi, Oğulcan; Ertunç, Özgür; Bundur, Zeynep Başaran; Bebek, Özkan (Elsevier, 2024-04)The use of inline quality assessment technologies is of great importance in meeting the consistent extrusion requirements of 3D concrete printing (3DCP) applications. This paper presents a system to regulate extrusion speed ... -
Automatic identification of roadway horizontal alignment information using geographic information system data: CurvS tool
Bartın, Bekir Oğuz; Demiroluk, S.; Ozbay, K.; Jami, Mojibulrahman (Sage, 2022)This paper introduces CurvS, a web-based tool for researchers and analysts that automatically extracts, visualizes, and analyses roadway horizontal alignment information using readily available geographic information system ... -
Bacteria-based concrete
Belie, N. de; Wang, J.; Bundur, Zeynep Başaran; Paine, K. (Elsevier, 2018)Several strains of bacteria can induce the precipitation of calcium carbonate, if the appropriate conditions, sufficient nutrients and a calcium source are provided. The metabolic pathway that is followed by the bacterial ... -
Behavior of columns of steel plate shear walls with beam-connected web plates
Özçelik, Ahmet Yiğit; Clayton, P. M. (Elsevier, 2018-10-01)Steel plate shear walls with beam-connected web plates (B-SPSWs) are an alternative configuration of steel plate shear walls (SPSWs) where web plates are connected to the beams only. Detaching web plates from columns and ... -
BIM execution plan based on BS EN ISO 19650‐1 and BS EN ISO 19650‐2 standards
Çekin, Erhan; Seyis, Senem (Istanbul Technical University, 2020)The major requirement of architecture, engineering, and construction (AEC) industry is to effectively manage information gathered from different project stakeholders. A structured guideline requires for managing the process ... -
BIM-based automated safety review for fall prevention
Tekbaş, Gökhan; Işın, Gürşans Güven (Springer, 2020)The construction industry is globally known as one of the most hazardous industries. Safety in construction is affected by many factors such as the behavior of workers, site conditions, the design and the implementation ... -
Bio-derived rheology modifying agents for cement-based materials
Azima, M.; Bundur, Zeynep Başaran (Springer, 2020)In recent few years, significant development has been made in concrete technology to accommodate the requirements of high-performance concrete. Rheology Modifying Agents (RMAs) (such as superplasticizers) and Viscosity ... -
Biomineralization in self-healing cement-based materials: investigating the temporal evolution of microbial metabolic state and material porosity
Bundur, Zeynep Başaran; Bae, S.; Kirisits, M. J.; Douglas Ferron, R. (American Society of Civil Engineers, 2017)The potential for self-healing of concrete via biomineralization processes in which microorganisms influence mineral precipitation is promising. To embed microorganisms within a cement-based material, key challenges are ... -
Biomineralized cement-based materials: impact of inoculating vegetative bacterial cells on hydration and strength
Bundur, Zeynep Başaran; Kirisits, M. J.; Ferron, R. D. (Elsevier, 2015-01)Biomineralization in cement-based materials has become a point of interest in recent years due to the possibility that such an approach could be used to develop a self-healing cement-based system. The objective of this ... -
Blind identification of site effects and bedrock motion from surface response signals
Ghahari, S. F.; Abazarsa, F.; Jeong, C.; Kurtuluş, Aslı; Taciroglu, E. (Elsevier, 2018-04)A method for blind identification of site effects from two nearby ground surface response signals is presented. The proposed approach makes use of ground surface accelerations from two nearby stations to back-calculate the ... -
Calcium sulfoaluminate cement and supplementary cementitious materials-containing binders in self-healing systems
Acarturk, B. C.; Sandalcı, Ilgın; Hull, N. M.; Bundur, Zeynep Başaran; Burris, L. E. (Elsevier, 2023-08)Creation of more durable concrete is one pathway to achieving improved sustainability and carbon footprint over a concrete structure's life. Microbially induced calcite precipitation has been shown to densify concrete ... -
Case study for comparative analysis of BIM-based LEED building and nonLEED building
Seyis, Senem (Pamukkale Üniversitesi, 2022)The objective of this study is to design a sustainable high-rise residential building using Leadership in Energy and Environmental Design (LEED) and Building Information Modeling (BIM), and perform comparative analysis for ... -
Characterization of site amplification by a parametric study
Fercan, N. O.; Şafak, E.; Ansal, Mustafa Atilla (Taylor & Francis, 2023)The reliability of Vs30 and the performance of alternative time averaged shear wave velocities (Vsz) and shear wave travel times (Ttz) at various depths, z, were investigated for the estimation of site amplification and ... -
Community resilience-focused technical investigation of the 2016 Lumberton, North Carolina, flood: An interdisciplinary approach
van de Lindt, J. W.; Peacock, W. G.; Mitrani-Reiser, J.; Rosenheim, N.; Deniz, Derya; Dillard, M.; Tomiczek, T.; Koliou, M.; Graettinger, A.; Crawford, P. S.; Harrison, K.; Barbosa, A.; Tobin, J.; Helgeson, J.; Peek, L.; Memari, M.; Sutley, E. J.; Hamideh, S.; Gu, D.; Cauffman, S.; Fung, J. (American Society of Civil Engineers, 2020-08-01)In early October 2016, Hurricane Matthew crossed North Carolina as a Category 1 storm, with some areas receiving 0.38-0.46 m (15-18 in.) of rainfall on already saturated soil. The NIST-funded Center for Risk-Based Community ... -
A comparative evaluation of sepiolite and nano-montmorillonite on the rheology of cementitious materials for 3D printing
Aydın, Eylül Mina; Kara, Ahmet Burhan; Bundur, Zeynep Başaran; Özyurt, N.; Bebek, Özkan; Gulgun, M. A. (Elsevier, 2022-10-03)Through the last decade, methods of digital manufacturing of concrete gained a significant interest compared to conventional concrete. The main challenge in additive manufacturing (3D printing) is to design a highly ...
Share this page
