Show simple item record

dc.contributor.authorHe, X.
dc.contributor.authorLustbader, J. A.
dc.contributor.authorArık, Mehmet
dc.contributor.authorSharma, R.
dc.date.accessioned2016-06-30T12:33:36Z
dc.date.available2016-06-30T12:33:36Z
dc.date.issued2012
dc.identifier.isbn978-1-4244-9531-3
dc.identifier.urihttp://hdl.handle.net/10679/4248
dc.identifier.urihttp://ieeexplore.ieee.org/xpl/articleDetails.jsp?reload=true&arnumber=6231579
dc.descriptionDue to copyright restrictions, the access to the full text of this article is only available via subscription.
dc.description.abstractIn this paper, heat transfer characteristics of single-slot steady-impinging air jets on a 25.4 mm × 25.4 mm vertical surface were experimentally investigated. The experiments were conducted with four different nozzles (length × width: 4 mm × 1 mm, 8 mm × 1 mm, 12 mm × 1 mm, and 15 mm × 1 mm). The parameters varied in the testing were Reynolds number (Re) (100 - 2,000) and dimensionless nozzle-to-plate spacing (H/Dh = 5, 10, 15, and 20). Correlations for average Nusselt numbers (Nu) were developed that accurately predict experimental data. The heat transfer coefficient over a vertical surface increases with increasing Re. For a small nozzle-to-plate spacing (H/Dh = 5), the average Nu correlation is not only a function of Re but also a function of nozzle length. For large nozzle-to-plate spacing (H/Dh ≥ 10) and nozzle length larger than 8 mm, the heat transfer coefficient is insensitive to H/Dh and nozzle length. A subset of this data was then compared to synthetic jet data in a separate study.
dc.language.isoengen_US
dc.publisherIEEE
dc.relation.ispartofThermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2012 13th IEEE Intersociety Conference on
dc.rightsrestrictedAccess
dc.titleCharacteristics of low reynolds number steady air jet impingement heat transfer over vertical flat surfacesen_US
dc.typeConference paperen_US
dc.peerreviewedyes
dc.publicationstatuspublisheden_US
dc.contributor.departmentÖzyeğin University
dc.contributor.authorID(ORCID 0000-0002-9505-281X & YÖK ID 124782) Arık, Mehmet
dc.contributor.ozuauthorArık, Mehmet
dc.identifier.startpage1364
dc.identifier.endpage1371
dc.identifier.wosWOS:000312835500174
dc.identifier.doi10.1109/ITHERM.2012.6231579
dc.subject.keywordsSteady jets
dc.subject.keywordsHeat transfer
dc.subject.keywordsImpingement cooling
dc.identifier.scopusSCOPUS:2-s2.0-84866148081
dc.contributor.authorMale1
dc.relation.publicationcategoryConference Paper - International - Institutional Academic Staff


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record


Share this page