Show simple item record

dc.contributor.authorMuslu, Ahmet Mete
dc.date.accessioned2020-03-19T12:05:59Z
dc.date.available2020-03-19T12:05:59Z
dc.date.issued2019-12
dc.identifier.urihttp://hdl.handle.net/10679/6413
dc.identifier.urihttps://tez.yok.gov.tr
dc.identifier.urihttp://discover.ozyegin.edu.tr/iii/encore/record/C__Rb3984678?lang=eng
dc.descriptionThesis (M.A.)--Özyeğin University, Graduate School of Sciences and Engineering, Department of Mechanical Engineering, December 2019.
dc.description.abstractA vast amount of electricity consumption for general lighting, the implementation of energy efficient technologies is highlighted in many platforms with the use of light emitting diodes (LEDs). Because of its environmentally friendly nature, LEDs offer a promising solution to minimize inefficient use of energy as the demanding operating conditions present new challenges. While they are taking place in a large number of applications, thermal challenges associated with the operation of LEDs have become a significant issue to address since their performance is greatly affected by thermal conditions. Reduction of lumen output, shorter lifetime and degradation of light characteristics with increasing package temperatures are critical issues that need to be addressed with innovative solutions. Especially in high power LEDs exposed to elevated heat fluxes, standard cooling methods fail to remove produced heat effectively. As LED systems have been evolving today in a great number of niche applications including automotive lighting, water purification, and skin imaging etc., extensive studies of scientists and engineers in the field have been constantly looking for ways to reduce generated heat loads and maximize the light output to reach the highest efficiency ratios. While the current systems developed over the last years achieved to reach even a 40% LED light extraction efficiency, a higher portion of the electrical input energy of LEDs is still consumed as heat and it hinders their development potential. In addition, the compact size of the LED systems poses some challenges to the reliable characterization of their performance at low uncertainties. Especially, the performance considerations associated with thermal loads over a limited size of LED chips require the effective characterization of these systems for various operational conditions. One of the techniques used for this purpose is that an LED package is characterized by a decrease in forward voltage with increasing junction temperature. As LEDs are operated at higher junction temperatures, the amount and quality of the light deteriorates significantly, and less efficient use of the LEDs results in additional operating costs and reduced lifetime of LEDs. In fact, accurate identification of thermal behavior of LED packages is one of the essential tasks towards improving the design of LED systems. If thermal characterization of LEDs is accurately done, performance parameters of LED packages are more reliably optimized to yield the highest possible performance ratios. In literature, there are some proposed junction temperature measurement methods such as Peak Wavelength Shift, Thermal (Infrared) Imaging and Forward Voltage Change methods mostly focused on blue LEDs. Most reliable method is cited as Forward Voltage Change Method based on the forward voltage drop over the active layer of an LED as a result of the rise in junction temperature. Therefore, FVCM has been regarded as the main method utilized in the study. Since the optical behavior of LEDs is significantly affected by thermal conditions of the high-power lighting systems, a better understanding towards optothermal characterization of LEDs with accurate and reliable junction temperature measurements is needed in order to improve the current LED systems. Current junction temperature measurements applied in industry and literature are based on certain assumptions that are questioned in various studies and user application notes. In addition, some issues need to be addressed in open literature for the development of high-power LEDs designed with enhanced thermal and optical performance. These include insightful analysis of the differences in high power red, green and blue LEDs, the impact of an optical path in an LED package, interaction of optothermal characteristics and the LED performance, reliable thermal testing of multi-LED devices. Thus, this thesis focused on filling these gaps in literature by offering a new measurement approach for junction temperature of multi-LED systems and proposing a highly accurate and rapid junction temperature measurement device. First of all, identifying thermal, optical and electrical characteristics of high-power LEDs was critical to understand the behavior of these LEDs; therefore, an AlGaInP based red LED was chosen to consider the impact of an LED dome on the chip performance. In addition, prediction capability of thermal imaging method in junction temperature measurements was evaluated in comparison with Forward Voltage Change and numerical thermal methods. It was observed that an LED dome may critically affect the thermal, optical and electrical behaviors of an LED chip. In fact, a 3.7% increase in junction temperature and a 6.1% drop in optical conversion efficiency were found at the normal operation of the red LED after the LED dome was removed. The results were also compared with a blue LED and lower junction temperatures were measured for the red LED at each driving current. The difference in junction temperature became even more noticeable at higher driving currents. Results have shown a good agreement between three different methods with a maximum variation of 6.9%. Later, three common types of LEDs (Red, Green, and Blue) were studied and their forward voltage drop (Vf) and optical behaviors with varying junction temperatures were compared. It is found that change in optical power with temperature are much higher in red LEDs compared to blue and green chips. On the other hand, a green LED chip experiences the largest change in forward voltage with respect to a unit change in junction temperature when compared to other type of LED chips. A new approach towards Forward Voltage Change Method was also introduced for the measurement of junction temperatures in multi-LED systems. An Integrating Sphere System was utilized to characterize thermal and optical traits of white multi- LED systems operating at different electrical conditions. Results show that additional electronic components in a multi-LED system can induce considerable thermal issues since it was determined that heat loads may reach up to total radiant power of LEDs and can decrease the conversion efficiency of a lighting unit by 6.1%. It was also shown that junction temperatures of LEDs can be affected by thermal conditions in the circuit and they need to be determined individually. Thermal imaging technique used to identify local hot spots in the study has shown even higher temperatures at the phosphor layer than the junction region so that the significance of thermal control in a phosphor layer has been understood in order to maximize the thermal and optical performance of a white LED package. As a result, with the proposed analysis and measurement technique in the study, a further understanding has been gained for developing better cooling techniques that will lead to more lumen extraction. In order to conduct junction temperature measurements of LEDs, there are several thermal characterization and measurement devices in the market. However, existing temperature measurement devices are quite expensive for most of the LED manufacturers, thermal engineers and designers who need to measure only the junction temperature of LEDs. Existing products use a thermal transient test technique for the junction temperature measurement. This technique involves thermal characterization with high sampling rate and resolution of data collection, such as heat flow path construction, die attach qualification, and material property identification, all of which make the product quite expensive. Moreover, that thermal characterization approach uses a structure function based on the assumption of one-dimensional heat flow path. However, in various types of LEDs, there are thermal masses on top of the LED module such as phosphor and attached lens that change the heat flux symmetry. This issue brings difficulties for the interpretation of the structural function and leads to limitations especially in junction temperature measurements of white LEDs. Consequently, there is a need in the state of the art for affordable, easy to produce and reliable systems which greatly facilitate thermal, optical and electrical design of future LED products with reliable junction temperature measurements. With the experiences gained on junction temperature measurements, a novel junction temperature measurement device with a compact design and robust operation has been developed. In the thesis, the design and manufacturing process of the device have been described along with the used measurement methodology. After the analysis for the heating and cooling system, the required heating and cooling units are determined, and the corresponding design is presented as the final design. Thus, a highly efficient rapid heating and cooling test chamber is offered to users who demand cost effective thermal solutions.en_US
dc.description.abstractÖnemli miktarda elektriğin dünya genelindeki genel aydınlatma amaçlı kullanımı düşünüldüğünde, ışık yayan diyotların (LED'ler) kullanımı ile yenilenebilir teknolojilerin hayata geçirilmesi her geçen gün daha çok gündeme gelmektedir. Çevre dostu yapısı nedeniyle, LED'ler, verimsiz enerji kullanımını en aza indirmek için zorlu koşullarda dahi umut verici çözümler sunar. Çok sayıda uygulamada yer almaları ile çalışma koşullarında ortaya çıkan zorlu ısıl koşullar, LED’lerin performansını büyük ölçüde etkileyerek önemli bir sorun haline gelmiştir. Işık miktarının azalması, kullanım ömrünün kısalması ve artan sıcaklık seviyeleri ile ışıksal özelliklerinin bozulması, yenilikçi çözümlerle ele alınması gereken kritik konulardır. Özellikle yoğun miktarda ısıl koşullara maruz kalan yüksek güçlü LED'lerde, üretilen ısının standart soğutma yöntemleri ile etkin bir şekilde uzaklaştırılması mümkün değildir. Bugün LED sistemleri otomotiv aydınlatmaları, su arıtma ve cilt görüntüleme gibi farklı alanlar dahil çok sayıda uygulamada geliştirilirken, bu alanda çalışan birçok bilim adamı ve mühendisler daimî olarak üretilen ısı yüklerini azaltmanın ve ışık miktarı ile verimlilik oranını en üst düzeye çıkarmanın yollarını aramaktadır. Son yıllarda geliştirilen mevcut LED sistemleri, %40'lık bir ışıksal verimliliğe ulaşmayı başarmasına rağmen harcanan elektrik enerjisinin büyük bir kısmı hala ısı olarak üretilmekte ve LED’lerin gelişim potansiyellerini engellemektedir. Bununla beraber, LED sistemlerinin kompakt boyutlarda olması, performanslarının güvenilir şekilde düşük ölçüm belirsizlikleri ile tanımlanmasında bazı zorluklar doğurur. Özellikle, sınırlı boyutlardaki bir LED çipi üzerindeki termal yüklerle ilgili performans hususlarını belirlemek, çeşitli çalışma koşullarında çalışan bu sistemlerin etkin karakterizasyonunu gerektirir. Bu amaçla kullanılan tekniklerden biri LED paketinin artan jonksiyon sıcaklığı ile ileri gerilimindeki düşüşünün karakterize edilmesidir. LED'ler daha yüksek birleşme sıcaklıklarında çalıştırılırken, ışığın miktarı ve kalitesi önemli ölçüde azalır ve LED'lerin daha az verimli kullanılması, ek işletme maliyetleri ve LED'lerin kullanım ömrünün kısalmasıyla sonuçlanır. Bu doğrultuda, LED paketlerinin termal davranışının doğru tanımlanması, LED sistemlerinin tasarımının iyileştirilmesine yönelik temel gerekliliklerden biridir. LED'lerin termal karakterizasyonu doğru yapılırsa, LED paketlerinin performans parametreleri mümkün olan en yüksek performans oranlarını elde etmek için daha güvenilir bir şekilde optimize edilir. Literatürde önerilen ve çoğunlukla mavi LED'lerin ölçümlerine odaklanan Tepe Dalga Boyu Kayması, Termal (Kızılötesi) Görüntüleme ve İleri Voltaj Değişimi yöntemleri gibi jonksiyon sıcaklık ölçüm yöntemleri vardır. En güvenilir yöntem, jonksiyon sıcaklığındaki yükselişin bir sonucu olarak LED'in aktif katmanı üzerindeki ileri gerilim düşüşüne dayanan İleri Voltaj Değişim Yöntemi olarak gösterilmektedir. Bu nedenle, bu teknik mevcut çalışmada kullanılan ana yöntem olarak kabul edilmiştir. Yüksek güçlü aydınlatma sistemlerindeki LED'lerin optik davranışı, termal koşullardan önemli ölçüde etkilendiğinden, mevcut sistemleri iyileştirmek için doğru ve güvenilir jonksiyon sıcaklığı ölçümleri, optik ve termal karakterizasyonu gerekmektedir. Endüstride ve literatürde uygulanan güncel jonksiyon sıcaklık ölçümleri, çeşitli çalışmalarda ve kullanıcı uygulama notlarında sorgulanmakta olan bazı varsayımlara dayanmaktadır. Bununla beraber, gelişmiş termal ve optik performansa sahip yüksek güçlü LED'lerin geliştirilmesi için literatürde bazı konuların ele alınması gerekir. Bunlar arasında yüksek güçlü kırmızı, yeşil ve mavi LED'lerdeki farklılıklara yönelik analizler, bir LED paketindeki optik yolun etkisi, optotermal özelliklerin etkileşiminin kapsamlı bir analizi ve çok LEDli sistemlerin güvenilir termal testi sayılabilir. Bu nedenle, bu tez, literatürdeki bu boşlukları doldururken, çok LED'li sistemlerin bağlantı sıcaklığına yeni bir yaklaşım sunmaya ve güvenilir ve hızlı ölçümler gerçekleştiren bir jonksiyon sıcaklığı ölçüm cihazı önermeye odaklanmıştır. Öncelikle, yüksek güçlü LED'lerin termal, optik ve elektriksel özelliklerini belirlemek, bu LED'lerin davranışını anlamak için kritiktir; bu nedenle, bir LED lensinin çip performansı üzerindeki etkisini araştırmak için AlGaInP tabanlı kırmızı bir LED seçilmiştir. Bununla beraber, jonksiyon sıcaklığı ölçümlerinde Termal Görüntüleme yönteminin ölçüm yeteneği, İleri Voltaj Değişimi ve Hesaplamalı Akışkanlar Dinamiği yöntemleriyle karşılaştırılarak değerlendirilmiştir. Bir LED lensin, LED çipinin termal, optik ve elektriksel davranışlarını kritik derecede etkileyebileceği gözlenmiştir. LED lensinin çıkarılması ile kırmızı LED'in normal çalışma koşullarındaki jonksiyon sıcaklığında %3.7'lik bir artış ve optik dönüşüm verimliliğinde %6.1'lik bir düşüş gözlemlenmiştir. Sonuçlar ayrıca mavi bir LED ile karşılaştırılmış ve her bir sürüş akımında kırmızı LED için daha düşük jonksiyon sıcaklıkları ölçülmüştür. Jonksiyon sıcaklıklarındaki fark, daha yüksek sürüş akımlarında daha da belirgin hale gelmiştir. Sonuçlar, maksimum %6.9'luk bir fark ile üç farklı yöntem arasında iyi bir uyum olduğunu göstermiştir. Gerçekleştirilen çalışmalarda, farklı renklerde (Kırmızı, Yeşil ve Mavi) ışınım yapan üç LED’in değişen jonksiyon sıcaklıkları ile birlikte gözlemlenen ileri voltaj düşüşü (Vf) ve optik davranışları karşılaştırılmıştır. Optik güç değerlerinin sıcaklık ile değişiminin, kırmızı LED'lerde mavi ve yeşil LED’lere göre çok daha yüksek olduğu bulunmuştur. Öte yandan, jonksiyon sıcaklığındaki birim değişimde, yeşil bir LED çipi, diğer LED çiplerine kıyasla, en büyük ileri gerilim düşüşünü göstermektedir. Ayrıca, çok LED’li sistemlerdeki jonksiyon sıcaklıklarının ölçümü için İleri Voltaj Değişim Yöntemi'ne yeni bir yaklaşım getirilmiştir. Farklı elektrik koşullarında çalışan beyaz çoklu LED sistemlerinin termal ve optik özelliklerini karakterize etmek için Ulbricht Küresi kullanılmıştır. Sonuçlar, çoklu bir LED sistemindeki elektronik bileşenlerin ürettiği ısı yüklerinin LED'lerin toplam ışıma gücüne ulaşabileceğini ve bir aydınlatma biriminin optik verimliliğini %6.1 oranında azaltabileceğini göstermektedir. Ayrıca LED'lerin jonksiyon sıcaklıklarının devredeki termal koşullardan etkilenebileceği ve ayrı ayrı belirlenmesi gerektiği gösterilmiştir. Çalışmada bölgesel sıcaklık noktalarını tanımlamak için kullanılan termal görüntüleme tekniği, fosfor tabakası üzerinde jonksiyon bölgesinde olduğundan daha yüksek sıcaklıklar göstermiştir. Bu sayede, termal ve optik performansın maksimuma çıkarılması için fosfor tabakasındaki ısıl kontrolün önemi anlaşılmıştır. Sonuç olarak, çalışmada önerilen ölçüm tekniği ve analizi ile daha fazla lümen çıkışına yol açan daha etkili soğutma teknikleri geliştirmek için derin bir anlayış kazanılmıştır. LED'lerin jonksiyon sıcaklığı ölçümlerini yapmak için piyasada çeşitli termal karakterizasyon ve ölçüm cihazları bulunmaktadır. Bununla birlikte, mevcut sıcaklık ölçüm cihazları, sadece jonksiyon sıcaklık ölçümlerine ihtiyaç duyan LED üreticileri, termal mühendisleri ve tasarımcılar için oldukça pahalıdır. Mevcut ürünler, jonksiyon sıcaklığı ölçümü için zamana bağlı ısıl değişime dayanan test tekniğini kullanır. Bu teknik, yüksek örnekleme hızı ve veri toplama çözünürlüğü gerektiren ve ürünün maaliyetini oldukça arttıran termal karakterizasyon işlemlerini içerir. Ayrıca, bahsedilen termal karakterizasyon, bir boyutlu ısı akış yolunun varsayımına dayanan bir ölçüm tekniğine dayanmaktadır. Bununla birlikte, çeşitli LED paketlerde, ısı akısı simetrisini değiştiren fosfor ve lens gibi termal kütleler vardır. Bu sorun ölçüm tekniği ile türetilen yapısal fonksiyonun (structure function) doğru bir şekilde yorumlanmasında zorluklar doğurmakta ve özellikle beyaz LED'lerin jonksiyon sıcaklık ölçümlerinde sınırlamalara yol açmaktadır. Sonuç olarak, gelecek LED teknolojilerinin; güvenilir jonksiyon sıcaklığı ölçümleriyle ısıl, optik ve elektriksel tasarımını büyük ölçüde kolaylaştıran; uygun maliyetli, üretilmesi kolay ve güvenilir sistemlere ihtiyaç duyulmaktadır. Jonksiyon sıcaklık ölçümlerinde edinilen deneyimlerle, kompakt tasarımlı ve güvenilir yeni bir jonksiyon sıcaklık ölçüm cihazı geliştirilmiştir. Mevcut tez çalışmasında, cihazın tasarım ve üretim süreci kullanılan ölçüm metodolojisi ile birlikte tarif edilmiştir. Isıtma ve soğutma sistemi analizinden sonra, gerekli ısıtma ve soğutma birimleri belirlenmiş ve ilgili sistem tasarımı sunulmuştur. Böylece, uygun maliyetli termal çözümler isteyen kullanıcılara yönelik yüksek verimli hızlı bir ısıtma ve soğutma düzeneği sunulmuştur.
dc.language.isoengen_US
dc.rightsrestrictedAccess
dc.titleA novel approach for identification of thermal and optical characteristics for the active layer of high power photonic devicesen_US
dc.title.alternativeYüksek güçlü fonotik sistemlerin aktif katmanının termal ve optik özelliklerinin karakterizasyonu için yeni bir yaklaşım
dc.typeMaster's thesisen_US
dc.contributor.advisorArık, Mehmet
dc.contributor.committeeMemberArık, Mehmet
dc.contributor.committeeMemberUğurdağ, Hasan Fatih
dc.contributor.committeeMemberBudaklı, M.
dc.publicationstatusUnpublisheden_US
dc.contributor.departmentÖzyeğin University
dc.subject.keywordsHeat transferen_US
dc.subject.keywordsLighten_US
dc.subject.keywordsHeat generationen_US
dc.subject.keywordsHeat performanceen_US
dc.subject.keywordsLight sourcesen_US
dc.subject.keywordsLEDen_US
dc.contributor.ozugradstudentMuslu, Ahmet Mete
dc.contributor.authorMale1
dc.relation.publicationcategoryThesis - Institutional Graduate Student


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

  • Master's Theses
    This Collection covers master's thesis produced at Özyeğin University

Show simple item record


Share this page