Browsing Mechanical Engineering by Title
Now showing items 148-167 of 465
-
Effect of the probe location on the absorption by an array of gold nano-particles on a dielectric surface
(Elsevier, 2017)Effect of silicon atomic force microscope probe position and particle spacing on the local absorption of an array of gold nanoparticles placed over a dielectric borosilicate glass surface are evaluated. An improved, ... -
Effects of aging on the microstructure and phase transformation behavior of cu-al-mn shape memory alloy
(Trans Tech Publications Ltd, 2021)In the present study, the effects of artificial aging heat treatment on the transformation temperatures and hardness of Cu-Al-Mn shape memory alloy have been investigated. The aging processes have been performed on the ... -
Effects of interlayer on the friction stir spot welding of stainless steel
(Elsevier, 2022-01)Comparison of Interlayer Friction Stir Spot Welding (IL-FSSW) and conventional Friction Stir Spot Welding (FSSW) of 304 stainless steel is presented in this study. IL-FSSW is introduced as a novel spot-welding technique ... -
Effects of turbulence intensity and length scale on the flame location of premixed turbulent combustion in a diffuser combustor
(J-STAGE, 2017)This study focused on the dependency of the flame location of a premixed propane-air flame on turbulence intensity and length scale. The flame location was investigated using a diffuser-type combustor to show the response ... -
An efficient design methodology for graded surface-based lattice structures using free-size optimization and enhanced mapping method
(Elsevier, 2021-11-15)In this paper, a novel Free-size Optimization based Graded Lattice Generation (FOGLG) method, that generates the functionally graded lattice (FGL) structures using free-size optimization, is proposed. In addition, the ... -
The eighth international symposium on radiative transfer
(Elsevier, 2017-08)This Special Issue of The Journal of Quantitative Spectroscopy and Radiative Transfer is based on the papers selected from RAD-16, the Eighth International Symposium on Radiative Transfer, which was held June 2016, in ... -
Elevated temperature mechanical behavior of severely deformed titanium
(Springer Nature, 2014-05)In this investigation, compression tests were performed at a strain rate of 0.001-0.1 s(-1) in the range of 600-900 degrees C to study the high temperature deformation behavior and flow stress model of commercial purity ... -
Elevated temperature mechanical characteristics and fracture behavior of a novel beta titanium alloy
(MDPI, 2023-02-03)In the present work, the elevated-temperature deformation characteristics and microstructural evolution of a Ti-5V-5Mo-5Cr-4Al alloy in solution-treatment conditions were studied under a tensile load at temperatures in the ... -
Engineering with and for light absorption and scattering: a quarter century of experimental research at RTL
(Accademia Peloritana dei Pericolanti, 2011)Characterization of particles requires detailed understanding of light interaction with homogeneous/inhomogeneous and regular/irregular shaped particles, or fractallike structures, within optically thin or thick media. ... -
Enhanced thermal performance of high flux led systems with two-phase immersion cooling
(IEEE, 2020)Considering significant worldwide use of electricity for general lighting, the implementation of energy efficient technologies is highlighted in many platforms with the use of light emitting diodes (LEDs). Because of its ... -
Enhancing local absorption within a gold nano-sphere on a dielectric surface under an AFM probe
(Elsevier, 2016-07)This study considers enhancing localized absorption by a gold nanoparticle (NP) placed over a substrate where an atomic force microscope (AFM) tip is in close proximity of the particle. The gold NP and AFM tip are interacting ... -
Enhancing the performance of Piezoelectric Energy Harvester under electrostatic actuation using a robust metaheuristic algorithm
(Elsevier, 2023-02)This study proposes a novel shape optimization methodology based on evolutionary algorithms to maximize the harvesting energy from piezoelectric energy harvester stimulated by the β-emitted radioisotope. The parametric ... -
Entropy generation analysis of laminar flows of water-based nanofluids in horizontal minitubes under constant heat flux conditions
(MDPI AG, 2018-04)During the last decade, second law analysis via entropy generation has become important in terms of entropy generation minimization (EGM), thermal engineering system design, irreversibility, and energy saving. In this ... -
Environmental force estimation for a robotic hand : compliant contact detection
(IEEE, 2015)This paper presents a model based compensation method to enable environmental force estimation for a robotic hand with no tactile or force sensors. To this end, we utilize multi-joint robot dynamics and disturbance observer ... -
Error bounds of pair distribution function analysis in characterization of thermal disorder in nanocrystals
(Int Union Crystallography, 2022-08)N/A -
Estimating quantitative features of nanoparticles using multiple derivatives of scattering profiles
(Elsevier, 2011-05)Characterization of nanoparticles on surfaces is a challenging in verse problem whose solution has many practical applications. This article proposes a method, suitable for in situ characterization systems, for estimating ... -
An Eulerian multiphase frost model based on heat transfer measurements
(Elsevier, 2023-12-01)In this paper, a laminar numerical model is developed to predict frost formation over a horizontal cold flat surface. An Eulerian-Eulerian multiphase approach is followed to model humid air and ice phases separately. Frost ... -
Eurotherm conference no. 105: computational thermal radiation in participating media V
(Elsevier, 2016-03)The Eurotherm Seminar No.: 105 on Computational Thermal Radiation in Participating Media was held in Albi, France on 1–3 April 2015. It was the fifth in a series after Mons, Belgium (Eurotherm Seminar No.: 73, April 2003), ... -
Evaluating the accuracy of rietveld analysis for diffraction data from nanocrystalline powders
(International Union of Crystallography, 2022-08)N/A -
Evaluating the mechanical behavior of ARB processed aluminum composites using shear punch testing
(Trans Tech Publications Ltd, 2020)Multi-layered metal composites have received considerable attention due to their improved mechanical and physical properties. In this study, Al6061/Al2024 composite was processed by accumulative roll bonding (ARB) as a ...
Share this page
