Show simple item record

dc.contributor.authorCakmak, O.
dc.contributor.authorErmek, E.
dc.contributor.authorKilinc, N.
dc.contributor.authorBulut, S.
dc.contributor.authorBaris, I.
dc.contributor.authorKavakli, I. H.
dc.contributor.authorYaralıoğlu, Göksen Göksenin
dc.contributor.authorUrey, H.
dc.date.accessioned2016-06-30T12:33:30Z
dc.date.available2016-06-30T12:33:30Z
dc.date.issued2015
dc.identifier.urihttp://hdl.handle.net/10679/4181
dc.identifier.urihttp://pubs.rsc.org/en/content/articlelanding/2015/lc/c4lc00809j#!divAbstract
dc.descriptionDue to copyright restrictions, the access to the full text of this article is only available via subscription.
dc.description.abstractThis paper proposes a MEMS-based sensor array enabling multiple clot-time tests for plasma in one disposable microfluidic cartridge. The versatile LoC (Lab-on-Chip) platform technology is demonstrated here for real-time coagulation tests (activated Partial Thromboplastin Time (aPTT) and Prothrombin Time (PT)). The system has a reader unit and a disposable cartridge. The reader has no electrical connections to the cartridge. This enables simple and low-cost cartridge designs and avoids reliability problems associated with electrical connections. The cartridge consists of microfluidic channels and MEMS microcantilevers placed in each channel. The microcantilevers are made of electroplated nickel. They are actuated remotely using an external electro-coil and the read-out is also conducted remotely using a laser. The phase difference between the cantilever oscillation and the coil drive is monitored in real time. During coagulation, the viscosity of the blood plasma increases resulting in a change in the phase read-out. The proposed assay was tested on human and control plasma samples for PT and aPTT measurements. PT and aPTT measurements from control plasma samples are comparable with the manufacturer's datasheet and the commercial reference device. The measurement system has an overall 7.28% and 6.33% CV for PT and aPTT, respectively. For further implementation, the microfluidic channels of the cartridge were functionalized for PT and aPTT tests by drying specific reagents in each channel. Since simultaneous PT and aPTT measurements are needed in order to properly evaluate the coagulation system, one of the most prominent features of the proposed assay is enabling parallel measurement of different coagulation parameters. Additionally, the design of the cartridge and the read-out system as well as the obtained reproducible results with 10 μl of the plasma samples suggest an opportunity for a possible point-of-care application.
dc.description.sponsorshipTÜBİTAK
dc.language.isoengen_US
dc.publisherRoyal Society of Chemistry
dc.relationinfo:turkey/grantAgreement/TUBITAK/111E184
dc.relationinfo:turkey/grantAgreement/TUBITAK/113S074
dc.relation.ispartofLab on a Chip - Miniaturisation for Chemistry and Biology
dc.rightsrestrictedAccess
dc.titleA cartridge based sensor array platform for multiple coagulation measurements from plasmaen_US
dc.typeArticleen_US
dc.peerreviewedyes
dc.publicationstatuspublisheden_US
dc.contributor.departmentÖzyeğin University
dc.contributor.authorID(ORCID 0000-0002-3242-5797 & YÖK ID 192045) Yaralıoğlu, Göksenin
dc.contributor.ozuauthorYaralıoğlu, Göksen Göksenin
dc.identifier.volume15
dc.identifier.issue1
dc.identifier.startpage113
dc.identifier.endpage120
dc.identifier.wosWOS:000346478100015
dc.identifier.doi10.1039/C4LC00809J
dc.identifier.scopusSCOPUS:2-s2.0-84915750359
dc.contributor.authorMale1


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record


Share this page